Lost Channels - Please help

 

Bronze Member
Username: Palmettolola

Post Number: 15
Registered: Dec-07
For the past couple of months, I have experienced lost channels. I have VS Plat Lite and use Echo 7 & 8. Just out of the blue one time when loading a new bin, I lost half of my channels and can't get them back. I can't get ESPNs, Speed, HGTV, MTV, and many, many more! I have tried loading the factory bin, new bin, and the lastest SAT file, but still unable to get all the channels back. When I do an Auto Scan for ES 7 & 8, I ususally end up with duplicates of the same channels.

Is there anyone else that has experienced this and especially is there anyone out there that can tell me what I should try to do to fix it.

I know I can't do this until we get a new bin, but at least I can be prepared.

Thanks!
 

Silver Member
Username: Abj

Post Number: 547
Registered: Feb-06
make sure you have auto transponder setting to on..
Please post your antenna setting for further assitant
 

Silver Member
Username: Abj

Post Number: 548
Registered: Feb-06
hope you do have signal for both satellite... if you are pointing 119 , you should have 119 locked on your uppper right hand corner of the screen.
Same goes for 110.
Make sure you have assigned both satelite right port...
 

Silver Member
Username: Madflea168

Post Number: 390
Registered: Jan-08
people reported the bins erase the data sometimes, before you re scan, always make sure your antenna setting are correct.
 

Silver Member
Username: Luser

Post Number: 178
Registered: Nov-07
One way to get a good scan is go to channel scan delete all but one tp with good Q prob 12224. Make sure network search is on and hit scan. Return to channel scan and any tp's without channels change polarity and if Q signal appears rescan with network search off. It worked well with extreme.
 

Bronze Member
Username: Tgyoung1

Illinois U.s.a.

Post Number: 31
Registered: Jul-06
on pansat 2700 how do you turn off network scan. have couple freq that not scanning in? 12457 for speed channel 12443? thanks
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 1454
Registered: Jan-08
PalmettoLola
This is a virus from bad bin who attack on delay.

try it:
All viewsat box
"Write your sat info before"
Go to Code menu
Select Nagra and on Dish 01 06 00 Dish 00 01 00 dish 01 01 00
Delete this 3 provider one by one with F3 on remote
"NEW" do same thing with all provider on Bev provider
09 07 00
09 06 00
09 05 00
09 01 00
08 01 00
no need to delete keys
switch off 10 secs on back panel
"New" do a factory default
and load last bin for your box (from dsstesterDOTcom)
turn autoroll on
Keep on
Bin and autoroll regenerete keys
Resolve problem with lost channel , autoroll, freeze and search signal


Do setup on each sat and auto scan on each sat after for recover all channel
"Dont do a blind no need"
"Dont load factory bin"

Thats erase bad data in the box
For box who lost channel and sat setup
ENJOY TV

TESTED and work fine
Issue for problem on Viewsat
Thanks
 

New member
Username: Netodss

Sky

Post Number: 1
Registered: Jul-07
did you see that ftamafia is getting bigger and better they have a new bin for cnx for b3v open up the 401 channel i think its sunday ticket or is it a apirl fools gag.... let me know thanks
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us