It seems to be a new attack problem on some Viewsat box
try it: All viewsat box "Write your sat info before" Go to Code menu Select Nagra and on Dish 01 06 00 Dish 00 01 00 dish 01 01 00 Delete this 3 provider one by one with F3 on remote "NEW" do same thing with all provider on Bev provider 09 07 00 09 06 00 09 05 00 09 01 00 08 01 00 no need to delete keys switch off 10 secs on back panel "New" do a factory default and load last bin for your box turn autoroll on Keep on Bin and autoroll regenerete keys Resolve problem with lost channel , autoroll, freeze and search signal
Do setup on each sat and auto scan on each sat after for recover all channel "Dont do a blind no need" "Dont load factory bin"
Thats erase bad data in the box For box who lost channel and sat setup ENJOY TV
TESTED and work fine New issue for problem on Viewsat Thanks
Hello Plymouth hope all is well ! Plymouth, Do you think your solution will fix the problem where if you where if you put the guide and select a channel it sends you to channel 100 ?? This is happening mostly with my pay-per view channels. Then once I punch in the the channel manually it will ask me select channel right or left(the arrow sign r or l) ?? Thanks
Plymouth: Why not save all info using channel Master and then reload it after the BIN. Try it on your Ultra and see. Cahnnel Master is avaialable at: http://www.sharpc.com
1) Go to menu , installation, Pin code is 0000, antenna setup and on each sat you have like Nimiq 1, write each info you see: LNB power: LNB type: LNB frq: TP freq: DiseqC 1.0: Motor: Legacy switch:
Note: if you have only one satellite to scan and 1 LNB no need to write and change setup.
2)Delete all provider for Bev with F3 on remote
3)Do setup no need if you have only one sat and one LNB. Just to choose the satellite you went. Exit it and save.
In menu installation choose: auto scan enter arrow down two times, select press OK,press OK Be sure you have good satellite on satellite list
Plymouth, I think I did it sucessfuly. Just that I lost My HBO's 300-306 were lost, have not checked anything else but so far those were lost. Do you know how to recover?? Man, you have the patience of Saint by the way. Once again thanks if you can help.
From where I always do, the FTA*Bins.n*et site (delete *). The channels were all showing on the 28th, then the signals dropped. I rescanned and now they're not even registering. It was raining a bit, but that usually doesn't pose a problem and it wasn't raining yesterday.
Counted among the missing are HBO-E, STARZ-E, a few PPVs and VODs, SPIKE and even free-signal stuff like channel 100.