or delete dn's key in the code menu like plymouth posted.
c/p try it: All viewsat box Go to Code menu Select Nagra and on Dish 01 06 00 Dish 00 01 00 dish 01 01 00 Delete this 3 provider one by one with F3 on remote no need to delete keys switch off 10 secs on back panel and load last bin for your box turn autoroll on Keep on Bin and autoroll regenerete keys Resolve problem with lost channel , autoroll and search signal
Thats erase bad data in the box For box who lost channel and sat setup ENJOY TV
TESTED and work fine New issue for problem on Viewsat Thanks
Do a blind scan on your sat after for recover all channel Because some new freq are provide Dont do a factory reset and factory bin No need it
OK Jib go to viewsatusa.com/support and download, unzip and install: Loader 1 - Firmware Updater (Plat and Xtreme) and download : VS2000 Platinum & Lite Factory Bin File - V0278 unzip it and load in receiver do a hard reboot load last bin for your box
Go to Code menu Select Nagra and on Dish 01 06 00 Dish 00 01 00 dish 01 01 00 Delete this 3 provider one by one with F3 on remote no need to delete keys switch off 10 secs on back panel and load last bin for your box turn autoroll on Keep on Bin and autoroll regenerete keys Resolve problem with lost channel , autoroll and search signal
Do a blind scan on your sat after for recover all channel Because some new freq are provide Now it supposed to work Good luck
I'm an experienced FTA user, i know how to set up the receiver once its fixed. However, even when i do a hard reboot and load the latest factory file, it still gives me the same error message "noCH" and nothing works at all.. not the remote control nor the features on the receiver, such as CH or Volume.. it's frozen on a blue screen..
Jib you load factory from viewsat or not? If yes try unplug your box for 1 hour, that may reset function like remote and you supposed lost pass word if you have.
if you did the fac reset and still no go, I guess you will have to do load the fac bin and default the box then load the latest bin is the last option.