My PanSat 2700A Screwd up - Help Please

 

New member
Username: Saika20005

Post Number: 3
Registered: Feb-08
Afterr loading and update boot file i lost all signals and even some menu settings e.g -Parental control. Please assist - saika
 

Silver Member
Username: Dimwitt

Post Number: 499
Registered: Aug-06
you need to do your antenna settings --select lnb type and dieqc port , for each sat you are aimed at.

parental control will return after successful satellite scan.
 

New member
Username: Saika20005

Post Number: 4
Registered: Feb-08
2nd receiver work in the same spot so nothing wrong in the dish settings. please assist for setup cofiguration.
 

Gold Member
Username: Nydas

Post Number: 9320
Registered: Jun-06
Look at the setup configuration of the receiver that is working and copy it.
 

New member
Username: Saika20005

Post Number: 7
Registered: Feb-08
Done, no luck
 

New member
Username: Saika20005

Post Number: 8
Registered: Feb-08
Hello All,

Here is my receiver infor deails as many of you requested for infor.

Receiver name and model: Pansat2700A
Boot file - 2700 A(B-75)
Bin file : 257
system info : X-87BL
Api-75- 2.57 Eubx
Boot Ver - 75
16 Mar 2008

Present Manu availe -
INSTALLATION (ACTIVE)
PARENTAL CONTROL (GRAY OUT)
cHANEL EDIT (gRAY OUT)
FACTORY SETTING (ACTIVE)
SYSTEM INFORMATION (ACTIVE)

SATELITE I am trying to scan are :
1) echo 9/T-13/KU and 2) echo 7/ku

LNB Type - Standard
LNB Local frequency - 10750
22khz - off
Diseqc # 1 also tried 2,3,4 no luck
Legecy SW - none
Skew - -45
TP (1) 11724 V20.000
Position Settings - USAlls - tried different settings but no luck.
satellite scan - all
LEVEL - 98%
QUALITY - 0%

AFTER EVEN BLIND SCAN RESULTS 0 program found

So thats all and look like I am damm since i did factory settings which may also cause more problem. Please justify why I lost parental control menue, where I should normally go choose dishnet and then Autoroll. Why I can bring back this option? Do you thinks my boot file is wrong then which is right one and where to get right one?
One last thing if I reset from back of the receiver display blink with number 6---7---5 then receiver goes to ON mode and thats all.

Please assist so I can move on. your assistance will be appreciated.

Saika
 

Gold Member
Username: Nydas

Post Number: 9349
Registered: Jun-06
Saika: Very good and detailed information.
1. Do User setup
2. Just set up Echo 7 (119w) - nothing else.

LNB Type - Standard (try ocs and dish-pro as well)
LNB Local frequency - 11250
22khz - off
Diseqc # 1 also try 2,3,4 as well
Legecy SW - none
Skew - -45
TP (1) 12224 V 20.000 (Try 12239 V as well)
Position Settings - USAlls - tried all
satellite scan - all

Do a Blind scan.

If no success, then install the genuine 256 or 254 BIN ([link removed]) and try as above.
Make sure you use Loader 27.02

The two grays WILL change to Active.
 

Bronze Member
Username: Popol_vuh

Post Number: 42
Registered: Jan-08
I concur with Nalin - the local frequency for a standard LNB should be set at 11250, not 10750. That is your problem right there. Anyway just by selecting "Standard" in the LNB field the frequency should automatically revert to 11250. Tried a list with that setting a few days ago and had no signal...
 

Bronze Member
Username: Phlyer

Ontario Canada

Post Number: 22
Registered: Apr-07
thanks so much nalin for the above info...for the longest time I could only get Nimiq after some person played with my unit. now I get Echo again
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us