The last ECM was related to autoroll and the latest BINs have not completely solved the problem. You can often get better reception keeping autoroll off and entering keys manually. The main issue is not the autoroll. Historically the autoroll and key tweaking are minor irritations whilst the providers are gearing up to another kind of ECM. They have run out of most options, but on the other hand they still have a few tricks up the sleeve till Nagra 3 is implemented.
plymouth check your settings,try a hrad reboot on rear switch,if problem continues load the factory bin then the current bin and scan your birds.good luck let me know
Sorry RTAP I try all that but no issu, yesterday i clear and rescan 119 and all comeback and i go on bev and return Dn and Boom Note bev and Gc work fine. I have a motor and i ask me if this is when i change sat the encryption btw Bev and Dn is mix. Each time it's very difficult to fix. This is my problem
As a trial and error Yo may wanna try turn off auto TP along with auto roll off Just to see if this has anything to do with current ECMs
What I noticed lately Nagra shifts frequency making TPs and Channels drop out But with new bins it re-corrects freq shift So if yo lose TPs and/or channels don't panic It's an old small hide the ball trick
King i try with autoroll on off nothing at all, all setup is correct . (I think) i know how recover my box now. The thing is when i change sat example from 82 to 119 the ECM for Dn is ready and the dish pass on 92 not the same encrypting. I dont see other thing
You have an excellent LNB. It should come through. Set up 129W properly. Go from BEV to 129W. See if it comes on. Then go from 129W to 119W and see if 119 comes in OK. I am suspecting a motor problem which occurs on going westerly direction but not when you are turning east.
