is b3v up? on Pansat 3500sd? my channels say no signal.. I checked out my signal level and it's 72 like usual when i receive signal and picture. i did a satellite scan and a blind scan and still no picture, it says 0 program found.. I also reloaded the 369 bin and still nothing.any suggestions..
may I suggest find a good forum and go to Pansat section. ftapeople.net is my favorite forum, you can always get in and some/most of FTA top people post there. including cypres, veracity,wilmero, thinko,sat guy etc
If he's posting at a site and hanging there..RUN the opposite way...he's a known snitch working for "the man"....and a well documented scammmer and liar..
LK = Largo Key = Key Largo = thill1951 =thill =storyteller = anonymous
All these mean only one thing. LK got $20,000 out of a fraud at ftaprosupport.com and is now trying to scam more. She has lost the job everywhere as mod and is looking for some work and to make more money through fraud.
African...what settings do you need..can you please explain, i thought 0% quality,lnb says standard,lnb local freq.says 11250, and diseqc says off, do you need anthing else..thank you
bugs...in all honestly, based on your June 07 registration here, and the questions U ask...its evident that U have done no reading at all, which U must do , IF U want to learn this stuff....its not that hard to learn, and if ya read a few days, U should be up and running and able to fix any problem yourself 99% of the time.....
lets START with a basic...
Receiver antenna settings....are basically U telling the receiver what satellites, LNB types, frequencies, switches, switch ports, and basic dish-cable-switch configuration that you have on the roof....your receiver has no idea what U did, so U must tell it by inputting CORRECT CORRESPONDONG antenna settings...so antenna settings will vary from house to house and setup to setup...there is NO standard "1 shoe fits all" setting..when U have the correct settings, write em down someplace, and save em..cause sometimes they change by themselves..
if the receiver doesn't know what U did, then you get no quality and no TV...and there are other reasons for no quality too...bad cable, connections etc..
bugs...in all honestly, based on your June 07 registration here, and the questions U ask...its evident that U have done no reading at all, which U must do , IF U want to learn this stuff....its not that hard to learn, and if ya read a few days, U should be up and running and able to fix any problem yourself 99% of the time.....
lets START with a basic...
Receiver antenna settings....are basically U telling the receiver what satellites, LNB types, frequencies, switches, switch ports, and basic dish-cable-switch configuration that you have on the roof....your receiver has no idea what U did, so U must tell it by inputting CORRECT CORRESPONDING antenna settings...so antenna settings will vary from house to house and setup to setup...there is NO standard "1 shoe fits all" setting..when U have the correct settings, write em down someplace, and save em..cause sometimes they change by themselves..
if the receiver doesn't know what U did, then you get no quality and no TV...and there are other reasons for no quality too...bad cable, connections etc..
bugs...its all good....just do yourself a favor and read the manuals and it will save U much time and headache later...I think U are trying what all newbies do, and NOT read and take shortcuts..and think this is plug n play...which it almost is, but some reading is necessary..
we all have been there, and looked for the easy way out...we all learned, reading is the easiest way out..once U've done that, things become much easier, and it all falls into place...people will always be around to help you, but help yourself first...
its all good !! some sensibility is coming back...no venom , no harshing our collective buzz, I am all of a sudden digging this thread once more, lets keep this on a mellow yellow and we can continue this good vibe.....some long time peps are back, lets get tech and not threats..
sorry...reverted to the good times...the 60's...got a problem stoner girl?...lets all start over..I think Lk has laid some groundwork, he did not have to come back but he is laying down basics again for newbies, lets all start over !!
