I am trying to get BEV/Nimiq2 on Pansat 3500S , but cannot find any place to put the code. I have got the satellite signal from Nimiq2, but on the code menu it only shows Dish Network options on Nagravision2.
Nimiq2 Satellite Nimiq (2) LNB Power ON LNB Type Standard LNB Local Freq 11250 22KHZ off Diseqc 1 Skew -45 TP [1] 12223(12224) V SR 20000 Legacy SW None Positioner setting Disable all
You can ONLY scan what sat you are pointing to. The Antenna menu will show positive signal with many Sats, but that is useless unless you have a dish and LNB pointing to the actual sat. If you are pointing to DN, then you will either have to install another Dish or turn the present Dish. The LNBs usually used for DN are OK for BEV.
