HELP Write failed

 

New member
Username: Trina15

Post Number: 1
Registered: Feb-08
When trying to download bin I get message write failed
used blacklist 1.4
I have pansat converted 2500a to 2700 original
have downloaded bins many times with no problems
what am I doing wrong
thanks
 

Silver Member
Username: Jwl1

Post Number: 186
Registered: May-06
Mary--sounds as if it is a timing issue--meaning not switching the back on at the right time. Make sure the back switch is off--then hit write--and flip the switch on.

Just keep trying, you'll get it sooner or later, if is a timing issue.
 

New member
Username: Trina15

Post Number: 2
Registered: Feb-08
I dont think its a timing issue I tried many times still cant download bin. I never had a problem downloading a bin before
 

Silver Member
Username: Rescate

VENEZUELA, M...

Post Number: 235
Registered: Nov-07
I had the same issue:

Then I reconverted again flashing with the j27_205_1.bin << Remember after this one you need to wait for two or three minutes to let the reciver reboot.

then flashing the latest bin:

Jvvh(F7)_Fortec-2500-Pantec_250.bin

then downlading my personal channel list (as a 2700 channel list, with channel master).

Now is ok, all channels UP


Upload
 

New member
Username: Trina15

Post Number: 3
Registered: Feb-08
I just need to reinstall bin j27_205_1.bin and than install the latest bin? Nalin is this right. What about if I get Write failed whwn I try to download bin j27_205_1.bin. Thanks
 

Silver Member
Username: One_eye_jack

Post Number: 398
Registered: Nov-07
Mary

Use Loader FortecStar STB v4.0 By Jihad
and Flash with Bin CS_250T_Lightning_100t_Series_serial.zip

http://ftabins.net/showthread.php?p=130762#post130762
 

Gold Member
Username: Nydas

Post Number: 8211
Registered: Jun-06
If you can't load the
j27_205_1.bin
Use the "revert to 2500" method and go back to Boot 60, load 294T and then start all over again.
Also look for loose cable connection or forgetting to connect - both these stupidities have occurred to me.
 

New member
Username: Trina15

Post Number: 4
Registered: Feb-08
Nalin
I tried to revert to 2500 and boot 60 bin
I get the message "FLASH UPDATE FAIL" Thanks
 

Gold Member
Username: Nydas

Post Number: 8215
Registered: Jun-06
You have to use the Chancy special 2700 to 2500 folder and then use his special reversion loader.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us