Pantec-pansat receiver
|
New member Username: Bodie1Post Number: 1 Registered: Feb-08 | Hello, Can anyone help me get a update for my receiver> Here's the deal with it--extrememicro was my guy and he dissappeared so I was programing a year ago with "pantect-pansat 2500 receiver" files so I think mine has been converted. I have not programed it since everything changed last summer. I keep putting in keys and we are down to just getting dish 110 locals & very little 119w. So I think I have to convert this thing. Please help |
|
Gold Member Username: NydasPost Number: 8191 Registered: Jun-06 | Most likely you are not "converted". When you switch from back, if it comes with "b-7-5" then you are converted othervise you are not. If you are not converted or already converted, I suggest you download and read the instructions, and decide if you want to convert. It is basically two loads instead of one load. **-- **-- **-- **-- **-- **-- **-- **-- **-- For Pansat 2500/FLU new conversions and converted to 2700 Use only on unconverted 2500/FLU or converted receivers. DO NOT USE ON Genuine Pansat 2700 or on Pansat 2700 clones Everything you need for 2500/Flu to 2700 conversion in one package. Instructions included. The latest Saif and Lothario_250, CS_250T and Jvvh BINs included. Also available separately in All_250.zip file The All_249-2.zip has all the 249 conversion files separately as well Some jtag files are also included. The full kit is in full_kit250D.zip or later. Download the kit and unzip in a new jvvh directory. Read the instructions in the Instructions.doc file. http://public.box.net/2500_full_kit |
|
New member Username: Bodie1Post Number: 2 Registered: Feb-08 | Thank you, we will give it a go. We are wanting to buy a better receiver, but with all the changes going on we wanted to wait until the dust settles a bit before getting one. Will we have to change the lnb on the dish to get the new 118.8? Thanks! Kay |
|
Gold Member Username: NydasPost Number: 8194 Registered: Jun-06 | For 118.7 discussion in this forum, there ar eat least 3 recent threads. The last one is: https://www.ecoustics.com/electronics/forum/home-video/449253.html |
|
Bronze Member Username: ChechiPost Number: 65 Registered: Apr-06 | Hello, Nalin, can you help? I flashed with the latest bin my converted pansat, it worked for a day, and this afternoon, I had problems rebooting. The " b-7-5" appear for a while, and diseappear, and so on. What is the problem? |
|
Gold Member Username: NydasPost Number: 8202 Registered: Jun-06 | Either the boot is bad or the BIN did not go in. Just flash again first with jvvh_208_2500to2700.bin or j27_205_1.bin and then with one of the 250 versions such as CS_250T_Lightning_100t_Series_serial.bin or Saif_Bin_250 (Alienware).bin Get it from the kit and follow the instructions properly. http://public.box.net/2500_full_kit |
|
Bronze Member Username: ChechiPost Number: 72 Registered: Apr-06 | Thanks Nalin, I am going to try it. By the way, what do you think about Pansat 250s ? If you compare it with viewsat ultra. |
|
Silver Member Username: MetallicaPost Number: 123 Registered: Jan-08 | there're no compare..Pansat WHO?? |
|
Gold Member Username: NydasPost Number: 8214 Registered: Jun-06 | At present, if you want to remain with the standard technology and hope to get support, then I suggest Sonicview 4000 (about $150-160). If you want a significant change with different technology, buy a Nfusion (about $220-240) |
|
Bronze Member Username: ChechiPost Number: 73 Registered: Apr-06 | I got a sonic view sv 4000. Is the flashing procedure, the same as the pansat? Where do I get the whole kit? Thank you. |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics