"Flash 250"

 

Bronze Member
Username: Post_man

Post Number: 44
Registered: Nov-07
I could use little help here,I can't seem to
load Bin 250. I have tried all 250 Bins from different sites with two different loaders.
It keeps coming up Flash 100% download OK.
but when I hook the receiver up it shows Bin 249.

What would happen if the file is not unzip?
How can I tell if the file is Zip or Unzip.

I did Factory settings, before loading the Bin.


Receiver is a converted Pansat 2500a

Using ....WinRAR
 

Gold Member
Username: Nydas

Post Number: 8193
Registered: Jun-06
You use only BL updater 1.4.
Original downloaded file has .zip suffix.
winrar will extract a .zip file.
An extracted file will have .bin suffix.
BL updater will not allow you to select any other but a .bin file.

Have you used this cable successfully for a receiver flash upgrade?
 

Bronze Member
Username: Post_man

Post Number: 45
Registered: Nov-07
Thanks much
my first time with this problem.
Iam little confuse with all these different
250 Bins. You say to use Saif Bin, where can I find this Bin? What is this Bin 250-3.zip at the
public Box? Thanks again for your help.
 

Gold Member
Username: Nydas

Post Number: 8196
Registered: Jun-06
Why don't you download and look?
 

New member
Username: Imran4811

Richmond hill, Ny AMERICA

Post Number: 5
Registered: Dec-07
r u guys talking about pansat 2700a and if u r then i could use some help, ok here's a thing i downloaded a bin from future-fta and its coming back invalid file or its sayin 'try downloading a file again' whats up with that can somebody plz solve ma problem or advise me to a different site.
 

Gold Member
Username: Nydas

Post Number: 8197
Registered: Jun-06
Imran Shah: This is about Converted Pansat 2500 and NOT about Pansat 2700.
Start a new thread and give more details about what you downloaded and what loader and receiver you are using.
 

Silver Member
Username: Dannienjulie

Post Number: 146
Registered: Jul-07
I have a box quantum 4700 i load the bin and all i get is a green line going back and forth what am i doing wrong plz help
 

Gold Member
Username: Nydas

Post Number: 8206
Registered: Jun-06
Quantum 4700 is a Pansat 2700 clone. You may have already damaged enough by loading the original 2700 BIN and may have to jtag.
If you are seeing "b-7-5" when you switch on from back, then you can try loading the Pansat 2700 clone BIN from zip file
Pansat-C 2700 250v1 TiVo.zip - find it at:
[link removed]
 

Gold Member
Username: Asharfi

Post Number: 1873
Registered: Aug-06
Omar Sharif,

Try AV Bin 250 which is modded to work on the converted FLU/2500 - 2700 receivers. Load it using Blacklist Loader 1.4.0.0. You can also try loader JVVH Bin 250, if that works for you. Only Dishnetwork will work ; BellExpressVu is down as Feb/14/2008.
 

Silver Member
Username: Dannienjulie

Post Number: 148
Registered: Jul-07
how do I jtag it. I don't see "b-7-5" all I see is little green lines going back and forth
 

Silver Member
Username: Dannienjulie

Post Number: 149
Registered: Jul-07
I guess every one is asleep so I will check back tomorrow. If any one could PLEASE help I would appreciate it. Thanks
 

Gold Member
Username: Nydas

Post Number: 8209
Registered: Jun-06
Julie Jones :
You have already damaged enough by loading the original 2700 BIN and will have to jtag. It is a fairly involved process and you should get some technical help for DIY.
Read at the following URLs.

http://www.dssrookie.com
http://www.dsstester*com
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us