I need a active bin for view sat 2000 platnium
|
Bronze Member Username: MiriNew york Post Number: 13 Registered: Jan-08 | i need a active bin for view sat 2000 platnium that works .please? |
|
Silver Member Username: Jurj1Post Number: 499 Registered: Jul-06 | For B3v or DN? |
|
Bronze Member Username: MiriNew york Post Number: 14 Registered: Jan-08 | when i put the bin in the Loader2 it only show the check √ on the MAIN SOFTWARE: the other boxes like Chanel Info: Sat or TP info Undefided file: thes files are not checked only the MAIN SOFTWARE:is check |
|
Gold Member Username: BrucesterPost Number: 1153 Registered: Jul-06 | you can get one at crazyfta dot com for bev you will have to download the older file you will see it in the file section enjoy and for dish the new bin dated 01-26-08 |
|
Silver Member Username: Jurj1Post Number: 500 Registered: Jul-06 | Use 1/17 for b3v and 1/26 for DN |
|
Bronze Member Username: MiriNew york Post Number: 16 Registered: Jan-08 | i have view sat 2000 platnium why do i need dish what are you talking about????? ------------------------------------------------ when i put the bin in the Loader2 it only show the check √ on the MAIN SOFTWARE: the other boxes like Chanel Info: Sat or TP info Undefided file: thes files are not checked only the MAIN SOFTWARE:is check |
|
Gold Member Username: KirankumarKenya Post Number: 1129 Registered: Oct-07 | Us which network are you trying to get? BEV or DN ? |
|
Bronze Member Username: MiriNew york Post Number: 17 Registered: Jan-08 | BEV |
|
Gold Member Username: KirankumarKenya Post Number: 1130 Registered: Oct-07 | then like Tony and Bruce said go to crazyfta and download the bin dated 1/17 enjoy |
|
Bronze Member Username: MiriNew york Post Number: 18 Registered: Jan-08 | why does it do that why word download to the reciver |
|
Bronze Member Username: MiriNew york Post Number: 19 Registered: Jan-08 | here is the picture click ->>>> http://i34.servimg.com/u/f34/11/23/18/89/lll10.gif |
|
Bronze Member Username: MiriNew york Post Number: 20 Registered: Jan-08 | eny idea ??? |
|
Gold Member Username: KirankumarKenya Post Number: 1131 Registered: Oct-07 | did you unzip the file? |
|
Bronze Member Username: MiriNew york Post Number: 22 Registered: Jan-08 | yes i did , i conacted the cable to the view sat platnium 2000 and to my pc and why wont work? |
|
Bronze Member Username: MiriNew york Post Number: 23 Registered: Jan-08 | helppppppp |
|
Silver Member Username: Jurj1Post Number: 502 Registered: Jul-06 | Confirm that you are on the correct COM port on your PC. |
|
Bronze Member Username: MiriNew york Post Number: 24 Registered: Jan-08 | how should i know wich port i should use ???? |
|
Bronze Member Username: MiriNew york Post Number: 25 Registered: Jan-08 | my cable name is RS232 Null Modem Cable is this the right one ? |
|
Silver Member Username: Jurj1Post Number: 503 Registered: Jul-06 | How many ports do you have on the back of your PC that the cable can go in. if it's 2 then you have 2 COM ports. I can walk you through seeing which COM ports you have, but just change the COM in loader2 until it works. Click Tools and select configuration and you will have this screen.  |
|
Silver Member Username: Jurj1Post Number: 504 Registered: Jul-06 | Also make sure VS Plat is powered off, then when after you start download, turn receiver on |
|
Bronze Member Username: MiriNew york Post Number: 26 Registered: Jan-08 | it has one port and i click on the COM1 and ok but it is still like that is there eny problem with my cable , cause why wont it work  |
|
Silver Member Username: Jurj1Post Number: 505 Registered: Jul-06 | DId you try cahnging to COM2 in Loader2, sometimes PC will assign your COM port to COM2 even though there is only one. Modem maybe COM1. |
|
Bronze Member Username: MiriNew york Post Number: 27 Registered: Jan-08 | i got hte bin at creazyftp... that is the bin that i use but i wont work i only show the MAIN SOFTWARE checked the others they are empty... |
|
Bronze Member Username: MiriNew york Post Number: 28 Registered: Jan-08 | yes , my cable is female DB9 to Female DB9 Rs-232C Cable |
|
Silver Member Username: Jurj1Post Number: 506 Registered: Jul-06 | DID YOU CHANGE to COM2 in LOADER2 SETTINGS AND TRY IT? |
|
Bronze Member Username: MiriNew york Post Number: 29 Registered: Jan-08 | hey do you have msn so you can help me througt there?? |
|
Bronze Member Username: MiriNew york Post Number: 30 Registered: Jan-08 | get mine -::: died_dd@hotmail.com |
|
Gold Member Username: KirankumarKenya Post Number: 1133 Registered: Oct-07 | Tony, get him to power the box off remove all cables,reboot his computer and start all over again,and not to turn the box on until he is just ready to download |
|
Silver Member Username: Jurj1Post Number: 507 Registered: Jul-06 | Listen I have to leave in a minute. in loader2 click tools and configuration select COM2 and click OK. With VS off, choose File and click PC to STB, turn receiver power on, file activity should begin. |
|
Bronze Member Username: MiriNew york Post Number: 31 Registered: Jan-08 | ok but why wont the other names be checked like the other boxes like Chanel Info: Sat or TP info Undefided file: onlu the the MAIN SOFTWARE: is checked and is not empty |
|
Silver Member Username: Jurj1Post Number: 509 Registered: Jul-06 | Because the file you are installing IS the Main file. THe others are not checked because the file is not a channel list file, etc. |
|
Bronze Member Username: MiriNew york Post Number: 32 Registered: Jan-08 | it looks like this lick ->>>> http://i34.servimg.com/u/f34/11/23/18/89/lll10.gif can you give me a good bin ?? |
|
Silver Member Username: Madflea168Post Number: 152 Registered: Jan-08 | you need to read the guide. thanx to the fta tester. https://www.ecoustics.com/electronics/forum/home-video/431069.html |
|
Bronze Member Username: UsaPost Number: 17 Registered: Jan-08 | i readd everything everything still not working |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics