CS_239T_Light_100t_series_ serial bin FLU & 2500 to 2700

 

Bronze Member
Username: Batjc

Post Number: 89
Registered: Aug-07
already out at

http://www.satnow.info/forums/showthread.php?t=19702
 

New member
Username: Zeez

San Mateo, CA USA

Post Number: 9
Registered: Dec-07
The file at the location above is only 72k and winzip cannot open it!
 

Bronze Member
Username: Batjc

Post Number: 94
Registered: Aug-07
you sure doin it ait?!

cause bin already download it and unzipped
 

New member
Username: Zeez

San Mateo, CA USA

Post Number: 10
Registered: Dec-07
It is working just fine now! Thank you very much
 

New member
Username: Newfie1949

Post Number: 5
Registered: Jan-08
Which one of the files do i use in first post?
cs 239t lifetime ultra flash j-tag-zip! what is this j tag zip mean? or 239t lighting 100t series or cs 239tv1 lighting 100t series all mean??? last time someone called nalin nyda help me. i used a 237t file. could it be that i should use the 239t this time!!!!!anykind of help would be good. i have one more last question? what are these numbers that come up on screen that start at 10%
and go and go! i seen these numbers go to around
500% or more.i also lost tv picture when these numbers come on.
 

Gold Member
Username: Nydas

Post Number: 7342
Registered: Jun-06
Use jvvh_240
 

Gold Member
Username: Nydas

Post Number: 7350
Registered: Jun-06
newfie: If you download this file and unzip it into a new directory "jvvh", you will find a lot of information in Instructions.doc and a lot of useful files.

http://public.box.net/2500_full_kit
 

New member
Username: Newfie1949

Post Number: 6
Registered: Jan-08
Again nalin nyda thank you very much.you are a very
helping person.the world could use a few more like you.
 

Bronze Member
Username: El_che

Post Number: 14
Registered: Jan-08
is this good for pansat 2500 clone converted to 2700?
 

Gold Member
Username: Nydas

Post Number: 7391
Registered: Jun-06
jvvh_240 is probably the best file published for conversions. In over 16 hours of trial I have had two or three interruptions whilst the AR was working - 40-50 seconds a time.
 

Gold Member
Username: Nydas

Post Number: 7401
Registered: Jun-06
Latest report suggest that BEV is down on 240 but still up and running on 239.

I am not currently pointing to BEV, so unable to confirm independently.
 

Silver Member
Username: Snw7619

Bahamas

Post Number: 159
Registered: Oct-06
nalin: i want to put another sat. in home(bedroom) can i use the same dish that i use for living room sat.

1 dish for 2 different sat's?
 

Gold Member
Username: Nydas

Post Number: 7404
Registered: Jun-06
You can with proper LNBs and switching.
Describe your current setup - Dishes, LNBs, switches
 

Silver Member
Username: Snw7619

Bahamas

Post Number: 160
Registered: Oct-06
umm not to sure i dish dual lnb echo7 #2 echo8 #1
pansat 2500a>>2700
 

Gold Member
Username: Nydas

Post Number: 7408
Registered: Jun-06
You probably have a twin LNB.
A twin LNB scans both 119 and 110 and brings them down with one cable - there is an internal switch.
There is no other cable coming out.
If that is the case, you will do well with DP34 switch. This switch has three sat inputs and four receiver outputs. You will probably have to power the DP34 and LNBs with additional power on Port one output and use Port 2 and Port 3 outputs for your two receivers. An old DN receiver applied to Port 1 is good as power supply . Two FTA receivers, ON all the time may also be able to power the system.
Dual LNBs are different. One dual LNB will scan only one Sat and feed two receivers. Some people have two duals mounted with a total of four cables out, and only two used to go through a DisEqC switch. You can add another DisEqC switch and connect the spare cables to the switch with its output to another receiver.
 

Silver Member
Username: Snw7619

Bahamas

Post Number: 165
Registered: Oct-06
okay thank you if its possible i can get sat. guy to check it out for me
thanks
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us