Pansat 3500 remote not working

 

New member
Username: Raja123

Post Number: 2
Registered: Jan-08
my orginal 3500 pansat remote is not working. plz help

just to let u know: my receiver is working cuz i can change channels manually.

Thanks
 

Gold Member
Username: Rtap

FL

Post Number: 1699
Registered: Jan-07
press the stb button on the remote.
 

Bronze Member
Username: Pleasersmiles

Post Number: 19
Registered: Nov-07
RTAP. Suggestion?

Rec: 3500sd- BIN 355 -Autoroll Off. Picture freezes in cycles, e.g. Plays, freezes about 20 seconds apart...If you change channels, e.g. 2 to 5 and return to 2 - Signal returns for approx 20 sec, then freeze cycle begins again. If left alone...goes to No signal and Wait for Picture (20%...40%%..etc)....begins to play again.
 

Bronze Member
Username: Pleasersmiles

Post Number: 20
Registered: Nov-07
RTAP....in addition to above post...Before installing BIN 355...Rec worked perfectly.
 

Gold Member
Username: Rtap

FL

Post Number: 1700
Registered: Jan-07
try these 2 steps.

1.do a hard reboot(turn switch off on rear wait 2 to 4 minutes then turn on.)

2.if not load factory bin the reload the current bin.files can be found at [link removed]
 

Bronze Member
Username: Pleasersmiles

Post Number: 21
Registered: Nov-07
RTAP

Perfect. Hard reboot corrected freeze problem.

For future reference: Where do I get 3500sd factory bin?

Advanced thanks. RTAP, I like.
 

Gold Member
Username: Rtap

FL

Post Number: 1704
Registered: Jan-07
files can be found at [link removed]
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us