Is it possible to get signal from 5 LNBs with 1 STB?

 

New member
Username: Yeagermeist

Post Number: 7
Registered: Nov-07
I have a Viewsat 9K on a Dish 1000 with 110, 119, and 129 working fine with a dp34 switch. I want to add another dish 500, so I can watch the BEV channels. Is there a way to get this to work so I don't have to get up and unhook the feed from one antenna(DN) and hook up the feed to the other(BEV) in order to watch them?
 

Gold Member
Username: Nydas

Post Number: 7212
Registered: Jun-06
A Digiwave 18 x 30 Dish with a 5 LNB bracket will take in 5 SAts from 82 to 119
 

New member
Username: Yeagermeist

Post Number: 8
Registered: Nov-07
I have dishes out the wazoo, its really not a problem to put up an old 500. So I guess my question is more about the switching part of the set up. How do you hook up 5 LNBs to a reciever? I currently have a dp34 running 3 lnbs to 3 receivers. I don't want to be dedicated to just DN or just BEV, I want to be able to just flip through the channels of both. What I really need is a dp34 style switch with 5 inputs for lnbs and 3 outputs to stbs. Does that exist? Thanks for any info.
 

Gold Member
Username: Nydas

Post Number: 7216
Registered: Jun-06
There are complicated switching arrangemnts which give a lot of headache and I am sure King will post them.
This is my simple solution.

Leave the current switching arrangement intact.
Create a similar setup for your second group (maximum three LNBs).
Bring the two output cables down to a manual A/B switch by the couch. Put the output of the manual switch to the TV!!!
You now have manual control over two groups of LNBs (3 LNBs in each).
 

Silver Member
Username: One_eye_jack

Post Number: 218
Registered: Nov-07
Yes, you will need a 2X1 DiSEqC Switch
for outside use. Run wire down to your receiver.Connect it to a... A/B switch
you can get one from Radio Shack.Now take
the incoming existing antenna wire from
your receiver and connect it to the A side
of the switch.Take a small wire jumper
from the center of the switch and connect it
to your receiver. When you switch to A you will have your existing setup.Switch to B
and you will have Bev's Birds Nimiq 1 and 2
 

New member
Username: Rubiks

Post Number: 3
Registered: Jan-08
just got a Vortex 7700 pro I need set up directions starting from powering on?? can anyone help

Thanks
 

Silver Member
Username: One_eye_jack

Post Number: 220
Registered: Nov-07
Sorry about that Nalin didn'tyou
 

Gold Member
Username: Nydas

Post Number: 7221
Registered: Jun-06
Jim G: Please do not highjack this thread.
You should start your own thread or read in the area of your interest.
 

New member
Username: Yeagermeist

Post Number: 9
Registered: Nov-07
That is the idea I had in my mind, but I wasn't sure if it would work. Thanks Nalin and Yukon.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us