Bell channels - Scanning but no channels

 

Bronze Member
Username: Qwertyuu

Post Number: 26
Registered: Nov-07
Hey. I have a viewsat platinum. 3 dishes( 1 or 61.5- port 1 , another one with 2 lnbs or 110 and 119 - port 2 and 3, another one for bell 82 (nimiq 2 - port 4) ).

I am getting 61.5, 110, 119.
The one for bell the s is around 70 and Q is more than 85. Whenever I am scanning, I am not getting any channels......During scaning.......i see "locked" at the end of line ) like 12234 V auto and than in the end "locked".
Scanning very slow.

All the settings are good. Please help what I can further do.

Thanks
 

Gold Member
Username: Brucester

Post Number: 1030
Registered: Jul-06
try with on only tack off the other 3 and scan bev and see if you get ch if so then huck the other ones up you might have bad switch try puting the cable for bev in port 1 then scan if you get ch on that setting you no your swatch is no good
 

Bronze Member
Username: Qwertyuu

Post Number: 27
Registered: Nov-07
Thanks bruce ! I will try that.
 

New member
Username: Onphyre

Post Number: 4
Registered: Oct-06
bruce:

i have a viewsat extreme pointed at 110. For transponder 12559 which has all the hockey/sports channels, it does not get a good signal, but all other transponders including ppv's work on 110. any suggestions?

thanks kindly.
 

Gold Member
Username: Brucester

Post Number: 1036
Registered: Jul-06
michale stay in one thread you are highjacking this thread you got a ancer from RTAP go read it
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us