For me is NOT working! Is it working for anyone else?
FLU Cloned to Pansat 27000: 1. I - as I always do - saved my channel list to Channel Master. 2. Set Default Settings. 3. Loaded CS_236TV2_Lightning_100t_Series_serial FLU & 2500 TO 2700. 4. Set default Settings again. 5. Load channel list saved in Channel Master. 6. Set Default Key
Getting "NO SIGNAL" on all birds except for DN. Testing DN/BEV/GC.
I went back and loaded an old bin and saved it to channel master (all 405 from Nim 1) and then reloaded new bin CS_236TV2_Lightning_100t and wrote the channels to flash but now some are "no signal" and and I basically have the same amount of working channels so more than 1/2 are still out with this new bin...the only advantage is it gives you all channels working and u do not have to search od and even...this is only with Bev...the situation with DN is best left with old bins if you are still wide open on DN
dj: If there are no bad freeze ups leave it at CS_232T. Otherwise use the pansat remote version of jvvh_236. Do not use the CS-236 file - it is defective.
I am little confused. which is the safe bin to use? Every where I read they are saying use this bin others saying don't use this bin. Does anyone here know? jvvh_236 BIN
Loaded CS_236TV2_Lightning_100t_Series_serial FLU & 2500 TO 2700.
Most of the 232 and 233 conversion BINs (CS_ and jvvh_)are OK. Minor freezes. jvvh_236 is available in two flavours - for Pansat Remote and for Fortec Remote and has les or no freezes. The CS_236 does not recognize the vertical channels so I rejected it.
Posted by me on Tuesday, January 15, 2008 - 02:54 pm:
Most of the 232 and 233 conversion BINs (CS_ and jvvh_)are OK. Minor freezes. jvvh_236 is available in two flavours - for Pansat Remote and for Fortec Remote and has less or no freezes.
bottom line...CS_236tv2 2nd version is defective...loads only 1/2 channels...vertical tp problem as NN stated...JVVH_236 pansat is good for all dn and bev and is wide open...Future FTA just released GC fix so expect revised conv bins soon...