all channels up with new CS_236TV...thanks Chancysand NOTE: SAVE YOUR CHANNEL LIST BEFORE LOADING CS_236T SERIAL BIN WITH CHANNEL MASTER SOMETIME CHANNELS WILL GET DELETED
NOTE: BEFORE SCAN DO A FACTORY RESET, SAVE YOUR SETTING & SCAN BEV FIRST THEN OTHER SATS
CS_236TV2_Lightning_100t_Series_serial Thanks to Chancysand for JTAG FULL BIN
this is not working either!! The rescanning of channels is missing alot of channels and making doubles of all of the ones that scan. This is doing this for both dish and bev.
never had this issue before and i always rescan my channels so that the guide works properly. Not a big fan of channelmaster on pansat..always seems to be issues with them working together properly
i loaded the new bin 4 times already and its freezing in the middle so i went back to CS 231 AND IT LOADED PERFECTLY and then i loaded the CS 236 again and still freezed in the middle :S
makes me wonder if this is really a CS bin? Never had problems like this from previous work of his and even version 2 is full of bugs. Maybe it was a rookie who wrote this bin and not CS??
I went back and loaded an old bin and saved it to channel master (all 405 from Nim 1) and then reloaded new bin and wrote the channels to flash but now some are "no signal" and and I basically have the same amount of working channels so more than 1/2 are still out with this new bin...the only advantage is it gives you all channels working and u do not have to search od and even...this is only with Bev...the situation with DN is best left with old bins if you are still wide open on DN
PSYCHMONSTER .. i did used the new bin bro and it was not loading so i went back to old bin which is CS 231 and it loaded perfectly. is there any problem with new bin ?