New member Username: AysaToronto, On Canada Post Number: 6 Registered: Jan-08 | my ariza 750 updated the new keys but its not bringing any channels and keeps saying data is updating. is there anything i can check or do? |
Gold Member Username: SatgrlPost Number: 1358 Registered: Oct-07 | do u have the latest file ? what file are u currently using |
New member Username: AysaToronto, On Canada Post Number: 7 Registered: Jan-08 | my latest file (i'm gussing u mean software) is the one that was from jan 2 by mingo. is that right? |
Silver Member Username: TehraniIran, Tehran Iran Post Number: 102 Registered: Oct-07 | you can get bin 310 it work fine Hi everyone hopefully everyone had a great holiday and new year. I wish everyone the absolute best this upcoming year. After loading the fix turn AR on than go to CNN and wait. You may get a scrambled bad Ch message for some time. Change channels than go back to CNN. Picture should than come on and no delay between channels. Have fun. Also I was wondering if there was an interest in adding TiVo PVR support to the ARIZA. One of the Reasons I ask is because no mater how hard any one tries TiVo still is and will always be the PVR people most favour. TiVo is TiVo and everything else is just a recorder. Once you experience TiVo first hand even with its monthly fee you can't go back to anything else. Every PVR on the market can't come close. Even if they try it's always compared to a Tivo. The only other PVR that is even worth playing with is Windows MCE 2005. Anyway just wondered if there was any interest in adding IR codes into the Ariza for TiVo PVR support. This fix was posted here first only on |
Bronze Member Username: The_codersPost Number: 46 Registered: Jan-08 | you can get bin 310 it work fine Hi everyone hopefully everyone had a great holiday and new year. I wish everyone the absolute best this upcoming year. After loading the fix turn AR on than go to CNN and wait. You may get a scrambled bad Ch message for some time. Change channels than go back to CNN. Picture should than come on and no delay between channels. Have fun. Also I was wondering if there was an interest in adding TiVo PVR support to the ARIZA. One of the Reasons I ask is because no mater how hard any one tries TiVo still is and will always be the PVR people most favour. TiVo is TiVo and everything else is just a recorder. Once you experience TiVo first hand even with its monthly fee you can't go back to anything else. Every PVR on the market can't come close. Even if they try it's always compared to a Tivo. The only other PVR that is even worth playing with is Windows MCE 2005. Anyway just wondered if there was any interest in adding IR codes into the Ariza for TiVo PVR support. This fix was posted here first only on http://www.youareanidiot.org/ |
Silver Member Username: TehraniIran, Tehran Iran Post Number: 103 Registered: Oct-07 | ARIZA 700 700s 750 & 800 AR Fix JAN 8 2008! |
Bronze Member Username: TerryhhhPost Number: 43 Registered: Feb-06 | hey looking for a file already unzipped to load into an ariza 750 cx waste of time??? terryhhh@canada.com cheers |
Gold Member Username: NydasPost Number: 7074 Registered: Jun-06 | Look at https://www.ecoustics.com/electronics/forum/home-video/434091.html That might throw some light on your problem |
Bronze Member Username: Alime_123Afgh, Ghazni Afgh Post Number: 64 Registered: Oct-07 | Hi all I have Ariza 700 I bught LNB For 90W I ave satellite T_5 ,110, 119 on one dish and I want to get Nimiq1/ku Tp 12224 H 20000 LNB power on LNB Type Standard LNB Loccal Freg 11250 22KHZ off________on Diseqc #3 Legacy None Positioner Setting Disable Level 80% Quality 0% After that I ut TP 12239H20000 Level 81% Quality 75% I set up it After that being Data updated 10000 Can some one help me? Thanks alot |
Bronze Member Username: Alime_123Afgh, Ghazni Afgh Post Number: 65 Registered: Oct-07 | Hi all I have Ariza 700 I bught LNB For 91.W I ave satellite T_5 ,110, 119 on one dish and I want to get Nimiq1/ku Tp 12224 H 20000 LNB power on LNB Type Standard LNB Loccal Freg 11250 22KHZ off________on Diseqc #3 Legacy None Positioner Setting Disable Level 80% Quality 0% After that I ut TP 12239H20000 Level 81% Quality 75% I set up it After that being Data updated 10000 Can some one help me? Thanks alot |