Disqec switch problem

 

Silver Member
Username: Asifali418

Lodi, Ca Usa

Post Number: 123
Registered: May-06
hi i buy brand new disqec switch .i use dish 500 wheni put drict the cable its work good.like port 1 for 119 and port 2 for 110 but i m use 148 sat too so i need disqec switch i put the cable in sat1 for dish 500 and 148 in sat 3 and my setting is port 1 for 119 and port2 for 110 and port 3 for 148 but its not work for me on 110 and 119 plz any help .remember i use vsx.before i use pansat switch another my dish 500 sat.and its work good for me. now i change my dish 500 and i also buy new switch.plz help me
 

Silver Member
Username: Kirankumar

Kenya

Post Number: 859
Registered: Oct-07
if you have a dishpro dual lnb then it has a switch built into the lnb,
if you give us your settings maybe we can help
 

Silver Member
Username: Asifali418

Lodi, Ca Usa

Post Number: 124
Registered: May-06
yah sure sat 7
satander
off
tp 12239
port 1

off
noneand for 110 same but tp 12224and port 2 also for 148 tp 12224 and port 3.and i d.nt know its dishpro dule or what but it has 3 switch in 2 lnb and 1 side is no switch u know alwasyes in 1 lnb 2 switch and u conect 2 cable in 1lnb but this one has 3 switch and i cunect only 1 cable and driently its work good
 

Silver Member
Username: Kirankumar

Kenya

Post Number: 860
Registered: Oct-07
for 119 try 12457
for 119 is ok at 12224 and
for 148 12326
 

Silver Member
Username: Asifali418

Lodi, Ca Usa

Post Number: 125
Registered: May-06
african i d,nt have any signal anf quilty too
 

Silver Member
Username: Asifali418

Lodi, Ca Usa

Post Number: 126
Registered: May-06
african i d,nt have any signal and quilty too
 

Bronze Member
Username: Jaye50

Post Number: 57
Registered: Aug-07
i've got switch problems also....i have to cut the rcvd off with the back switch in order to switch from echo 7 to echo 8.....
 

Silver Member
Username: Asifali418

Lodi, Ca Usa

Post Number: 127
Registered: May-06
u have vsx too
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us