My receiver has no power

 

New member
Username: Jimmy1970

Post Number: 9
Registered: Jan-08
hi all. i need a help. I have a fortecstar ultralife that i wasn't using for along time, last week, i decided to convert it to pansat 2700.So, i loaded the (b-75)bin along with the (jvvh)bin, connect it to the t.v., rescanned the channels and everything was ok. i was watching for about 20 minutes until the machine turnned off and never turned back on since then, no power in the receiver.can someone tell me if jtagging the machine will fix the problem, and if yes, what is the procedure to jtag and load the bins again with the correct file bins. thanx alot.
 

Silver Member
Username: Rescate

VENEZUELA, M...

Post Number: 180
Registered: Nov-07
yes jtag will fix

here is what to do:

https://www.ecoustics.com/electronics/forum/home-video/159977.html

Upload
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us