I am not getting cw800 to work. i have downloaded the latest 1.44 bin but it wont work.
do you need to do factory default before and after each bin load. is it must.
When you try to do factory default it ask you few quesiton what should be the answer to them it ask if you want to delete software, does that mean the latest bin or just the channels.
Please explain i have SW4000 and that box is so easy to configure then this.
Try Bins version 1.39, 1.38 or 1.37 After today's ECM, all receivers are working well on BINs of 21-26 Dec., 2007, and th elatest BINs are not working.
and if you do factory reset that will put it back to the way it came out of box but the bin will not chang if you put bin 137 and did factory reset that bin will bee there i do not have cw800 but all cw are simuler
Thanks guys it worked. I put 138 and it works fine on dish. one question
when i rescan the channels they come in as channel 001 002 003 instead of their orignal channel numbers like. Zee TV is 586(i bileve) but it shows up as 012 is there a way to get the orignal channel number back.
I must have done something to screw up the settings. please help to get the orignal channel numbers back.
in the menu chang to sid go to system setting then system look for ch number chang it to sid this is how it is down on cw600p and i think it is the same for all cw hope this helps
did you do a factory defoult if so that will chang the setting so on the remote go to menu click on it then move down till you see system setting then click on it go to system then go down to channel number on the remote us the vol to chang it to sid then exit it will sort by sid this will get you ch numbers in order like wat you see in the tv guide
Hi: Uguess 1-press menu 2-go to system setting. 3- Chose channel NO. 4-change normal to SID by pressing VOL + or -- 5-exit exit exit and channel will be sort to the original enjoy