Pansat 2500 Conversion

 

Bronze Member
Username: Snissar

Post Number: 38
Registered: Dec-07
hey guys i wanted convert my pansat 2500 to 2700
i started to transfer the file jvvh_208_2500to2700.bin to my reciver and then it didnt show b75 and i turned it off it doesnt turn back on
whats the problem

somewhere else i read if i u original pansat 2500a, install 293T or 294T Bin first which i didnt know before

any one know whats the problem now..:-(
 

Bronze Member
Username: Snissar

Post Number: 39
Registered: Dec-07
If using an original pansat 2500a, install 293T or 294T Bin first
Any of above whether converted or not converted.

i didnt know it^ and now it doesnt turn on
 

Gold Member
Username: Saqeeb9000

Post Number: 1321
Registered: Oct-07
they are already so many threads here for this reciever..
 

Bronze Member
Username: Snissar

Post Number: 40
Registered: Dec-07
but everyone has simple problems that alters the reciver
 

Gold Member
Username: Nydas

Post Number: 6875
Registered: Jun-06
Everything you need for 2500/Flu to 2700 conversion in one package.
Instructions included.

http://public.box.net/2500_full_kit
 

Bronze Member
Username: Snissar

Post Number: 42
Registered: Dec-07
i know nalin
but i did something wrong
i think i was supposed to load 294 bin to my reciever first but i loaded the jvvh_208_2500to2700 bin.

so its now not turning on
do i need jtag which i dont have any idea about ?
 

Gold Member
Username: Rtap

FL

Post Number: 1570
Registered: Jan-07
sns you have to jtag your receiver to bring it back to life.
 

Gold Member
Username: Nydas

Post Number: 6882
Registered: Jun-06
sns: If there is light, reverse it by using the revert kit included in a subdirectory of the full_kit8. Then start again. You are supposte to install 294T not 294 before starting the conversion.

http://public.box.net/2500_full_kit
 

Bronze Member
Username: Snissar

Post Number: 43
Registered: Dec-07
what if there is no light on display
 

Gold Member
Username: Nydas

Post Number: 6885
Registered: Jun-06
Then you need to jtag.

You can use the full jtag file supplied by Chancy with the CS232 or CS233T and it is there in the full_kit8.
You will need the jtag cables compatible with your original receiver.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us