Dish problem...help really needed....thanks
|
Silver Member Username: Thakkar2000Post Number: 153 Registered: Jun-06 | hi guys...got a weird problem.. I have 2 sat. dish- echo 3 and bev. everything was working fine before...but now i am not able to get "LEVEL" its static at 30% My set up: 2 simple regular dish one with (4 output lnb and another with 2 pin output lnb. the dish goes to a switch....(Echo 3 to LNB 1 switch and BEV to LNB 4 on the switch)...and the switch is connected to reciver ... in installation menu beside echo 3 i have DISQ to 1 and besides nimq bev to 4... i tried connected satellites individually and both work fine.....help really appreciated. |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2984 Registered: Sep-06 | I made a guide just for this reason to help users not have this happen.. https://www.ecoustics.com/electronics/forum/home-video/428318.html what you have is eather a settins wrong or a bad peice someware.... is the lnb's dish pro? what switch are you using? |
|
Silver Member Username: Thakkar2000Post Number: 154 Registered: Jun-06 | hi fta tester...thanks for ur help as always.... i will check the settings and get back the satellite is digiwave and no is not a dish pro lnb ...its regular with a 4 coaxil cable pin out..... the switch is digiwave diseqc 2.0 FREQ RANGE 950-2400mhz....insertion loss 3db (thats wut it says on dish) |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2989 Registered: Sep-06 | ok |
|
Silver Member Username: Thakkar2000Post Number: 155 Registered: Jun-06 | hey bud...here are my settings ECHO 3 lnb type = standard LNB local freq = 11250 22KHz = OFF DISEQ = 1 Legacy SW = NONE SKEW= 45 TP= [10] 12384 H 20.00 positioner setting = disable for bev lnb type = standard LNB local freq = 11250 22KHz = OFF DISEQ = 1 Legacy SW = NONE SKEW= -45 TP= [1] 122223 v 20.00 positioner setting = disable |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2991 Registered: Sep-06 | they both cant be on the 1st position of the disqc switch is it just 2 sat's you get? |
|
Silver Member Username: Thakkar2000Post Number: 157 Registered: Jun-06 | typo...for bev disq is 4..my mistake yea i have only these 2 sats |
|
Silver Member Username: Thakkar2000Post Number: 158 Registered: Jun-06 | i tried putting in the older bin...same thing |
|
Silver Member Username: Thakkar2000Post Number: 159 Registered: Jun-06 | ????? help really appreciated guys |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 3003 Registered: Sep-06 | As soon as your done putting in bin's and decide to keep one let me know then we will adjust your settings |
|
Silver Member Username: Thakkar2000Post Number: 160 Registered: Jun-06 | thanks fta tester k i put in fresh CS_235 didnt upload my regular channel list did the wire set up ...as soon as i connect the diseq wire from switch to reciver...the level goes to 30 |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics