New member Username: Saado7Post Number: 9 Registered: Dec-07 | when i try to delete a chanel on my ultra everything freeze and i have to re-boot and after a blind scan nothing is saved anybody had this problem pls?? |
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2592 Registered: Sep-06 | ok we have had that problem before with the platinums as well. seems like a channel will cause it to reboot and sometimes lose all data...or when you are trying to delete a channel. we had to rescan the sat, make a note of the "bad" channel somehow...then use OSD EDIT avalable here [link removed] to delete the channel useing a computer instead of the receiver. you upload the channel list to the computer useing the serial cord and loader program https://www.ecoustics.com/electronics/forum/home-video/424720.html |
New member Username: Saado7Post Number: 10 Registered: Dec-07 | thnx i will try that but the OSD EDIT is for xtreme can i use it on ultra ?? |
Silver Member Username: DimwittPost Number: 330 Registered: Aug-06 | delete channels with autoroll and auto tp update off |
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2595 Registered: Sep-06 | yes you can still use it as far as i know i agree after you do your blind scan turn off auto update tp it can make the receiver delete channels |
Bronze Member Username: Saado7Post Number: 12 Registered: Dec-07 | i managed to delete all the channels one shot but still i can't use blind scan i have to do an auto scan (in blind scan i find 400 channel but could not save) auto scan only save 78 channel |
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2597 Registered: Sep-06 | did you get a updated satfile? without it you will not get all the channels thats why blind scan is best i would start over factory reset adjust antenna settings blind scan what is your set up? lnbs, switchs, everthing |
Bronze Member Username: Saado7Post Number: 14 Registered: Dec-07 | yep i just got updated satfile my settings are 61.5: LNB Power - on , LNB Type - Standard , LNB Freq. - 11250 , 22 KHz - off , tp freq. - 12297 DisEqc - Port 4 Motor - off , Legacy SW - none 119: LNB Power - on LNB Type - Standard LNB Freq. - 11250 , 22 KHz - off , tp freq. - 12224 , DisEqc - Port 2 , Motor - off Legacy SW - none 110: LNB Power - on , LNB Type - Standard LNB Freq. - 11250 , 22 KHz - off tp freq. - 12224,DisEqc - Port 3 , Motor - off Legacy SW - none |
New member Username: SbabineauOntario Canada Post Number: 1 Registered: Dec-07 | Can someone please help me. I just updated my bin file on my Viewsat Ultra, I then did a channel scan and I get nothing but auto roll processing. Am I doing it wrong? Step by step insrtuctions would be great! |
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2602 Registered: Sep-06 | Sherry, you hijacked this thread. Their is a thread about this in the forum. we are experiencing that with all receivers on some channels on DN. aado, that is your settings please list what you have connected to the receiver? s |
New member Username: SbabineauOntario Canada Post Number: 3 Registered: Dec-07 | I am new at this stuff. I have my tv connected to the reciever. Is this what you want to know. |
Bronze Member Username: Smoke74Post Number: 49 Registered: Oct-07 | it's autorolling because it's down |
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2604 Registered: Sep-06 | Sherry, You need to start a new thread. |
New member Username: SbabineauOntario Canada Post Number: 5 Registered: Dec-07 | The file was updated DEC. 26 is it down already? |
New member Username: SbabineauOntario Canada Post Number: 6 Registered: Dec-07 | Thanks for your help. And sorry I hijacked your thread. |
Bronze Member Username: Smoke74Post Number: 51 Registered: Oct-07 | yup...bev is down and out and charlie is following |