Converted 2700A

 

Bronze Member
Username: Undisputed

Post Number: 12
Registered: Nov-07
I have a converted pansat 2700. I can not load the new file(X-87BL......B75_231_api....) dated on the 22nd of December; I get an error that says (check 2700A file). I am using pansat loader 27.02. Does anyone know how to slove my problem?
 

Gold Member
Username: Satgrl

Post Number: 1201
Registered: Oct-07
well that is because u have to use jvvh file or chancy file 232..ur using the wrong file
 

Gold Member
Username: Nydas

Post Number: 6538
Registered: Jun-06
STOP.
Everything wrong.

A converted Pansat means it was a 2500 or a flu before and is now working like a Pansat 2700.

If that is the case, look at this.

For Pansat 2500/FLU new conversions and converted to 2700

In case you have difficulty getting the latest BIN, it is available here.

Everything you need for 2500/Flu to 2700 conversion in one package.
Instructions included.
The latest jvvh_232_(BG)_ bins included and available separately
The latest CS_232T_lightning Bin included and available separately.

http://public.box.net/2500_full_kit

FOR DN and BEV FIX 24th December, 2007.
 

Bronze Member
Username: Undisputed

Post Number: 13
Registered: Nov-07
where can i get those files from satgrl?
 

Bronze Member
Username: Undisputed

Post Number: 14
Registered: Nov-07
hey nalin i am using the website above but when trying to download one of those files i get a (Bin file does not correct! Download was prohibited) error.
 

Silver Member
Username: Viruscauser

Leesburg, Georgia

Post Number: 689
Registered: Mar-07
Hey guys, the jvvh_233 has been released. http://www.ftabins.net/showthread.php?p=79846#post79846. A/R fix I hear but I've not tried it yet.
 

Gold Member
Username: Asharfi

Post Number: 1642
Registered: Aug-06
vince carter,

You're loading the WRONG bin file to your receiver and you'll end up kiiling your converted receiver. Those converted units use either JVVH bins or Chancysand bins.
 

Bronze Member
Username: Undisputed

Post Number: 15
Registered: Nov-07
Hey AV iam trying to download the jvvh files but i am still getting an error. the error says (Bin file does not correct! Download was prohibited). Do U know whats the problem?
 

Silver Member
Username: Dimwitt

Post Number: 322
Registered: Aug-06
use bl loader 1.4
 

Silver Member
Username: Sjain80

Post Number: 107
Registered: Jun-06
hey AV and nalin...just a question off the subject. I am thinking about buying viewsat 7000 pvr. Do you think that is a good choice and where should I buy it from .thanks for the information
 

Gold Member
Username: Satgrl

Post Number: 1203
Registered: Oct-07
yeah thats a good choice or u can try viewsat ultra or sonicview 4000..u can purchase from a trusted seller at ebay.com
 

Silver Member
Username: Sjain80

Post Number: 108
Registered: Jun-06
thanks for the information satgrl..only reason I am buying this receiver is because of dual tuner and DVR. do you think it's good choice for that.I want to be able to record shows for my daughter..thanks..
 

Gold Member
Username: Satgrl

Post Number: 1204
Registered: Oct-07
yeah to me i think all viewsats are a good choice..but everyone has their opinions..try asking around..many people have diffrent things to say about it..start a new thread if u like get everyones opinions.;)
 

Gold Member
Username: Ke5aqn

IF I DONT KNOW THE ANSWER, I WILL FIND...

Post Number: 2481
Registered: Sep-06
shawn in your new thread we will offer our opinions
 

Silver Member
Username: Sjain80

Post Number: 110
Registered: Jun-06
didn't mean to take over this thread.. thanks for the information..
 

Bronze Member
Username: Undisputed

Post Number: 16
Registered: Nov-07
hey guys someone please help. tooter again i got an error. I used the lb 1.4 loader but i got a (write failed [ER1] message).
 

Bronze Member
Username: Undisputed

Post Number: 17
Registered: Nov-07
help...help....i wanna watch tv.....help...help
 

Silver Member
Username: Viruscauser

Leesburg, Georgia

Post Number: 691
Registered: Mar-07
Vince, if you have the correct file, the jvvh_233 for example, and the correct loader, Bl loader 1.3 or 1.4, try hitting "write bin" and turning ON your receiver AT THE SAME TIME.

It may take a few tries to get the timing right but it should load.
 

Gold Member
Username: Asharfi

Post Number: 1643
Registered: Aug-06
vince carter,

Use Blacklist Loader 1.4.0.0 and make sure you have the correct cable and you're using the correct com port. Below are the instructions on loading bins:


Instructions:

- Please turn OFF your receiver
- Connect your receiver to your computer using the correct serial canle
- Now open the Blacklist STB Updater 1.4.0.0
- Now, please select the "BIN" option on the Blacklist STB Updater 1.4.0.0
- Now please select the correct "COM" port on the Blacklist STB Updater 1.4.0.
- Now, please click the "Select Bin" button on the Blacklist STB Updater 1.4.0.0
- Now, please look for the latest bin and click on it
- Now, please turn ON your receiver and as soon as you see the first "dash light" on your receiver's front panel, click the "Write Bin" button on the Blacklist STB Updater 1.4.0.0
- Now, please wait and let the bin download process complete
- When it's done, your receiver will REBOOT automatically and soon you'll see B 7 5 flashes back and forth on your receiver's front panel
- That flashing B 7 5 will stop and freeze on number 5 for 30 seconds
- After 30 seconds or so, your receiver will automatically boot (It'll turn ON automatically, after 30 seconds)
- Now, please turn your receiver OFF and disconnect it from your computer

Note: After you finish with the above steps, you have to re-scan your satellite(s). After you're done with that, you have to enter the latest keys (Dishnetwork or BellExpressVu). Here's what you need to do after you re-scan your satellite(s):

- Go to MENU
- Then, go to Parental Control / CAS Control Menu
- Then, go to Second/CAS Pin and enter 0000
- Then, go to Set Default Key
- Then, go to Nagravision 2 to enter the latest Dishnetwork or BellExpressVu keys

After you enter and store the latest keys, please EXIT the menu and start watching TV!

Instructions provided by DSS World!
 

Bronze Member
Username: Locnoir

Post Number: 27
Registered: Aug-06
Hello Nalin & AV:
I have Pansat 2500A. I downloaded files from http://public.box.net/2500_full_kit, then I followed the instruction. Now, eveything works fine, except a minor problem which is the key codes do not autoroll! Each time the keys changed, I have to enter them manually! Please advise! Thank you!
 

Bronze Member
Username: Tibie11

Post Number: 19
Registered: Sep-07
I converted my pansat 2500 to 2700, but I don't know how entered the codes manually, I go on nagravision 2, then 0901 (I have access has 00 and NOT 01).. WHY???
 

Gold Member
Username: Asharfi

Post Number: 1644
Registered: Aug-06
Loc Noir,

Try turning OFF the autoroll option. Autoroll can between 10% to 500% so you need patience. :-)

lys,

To enter 01 keys, you have to change the key number from 00 to 01 by click on your FTA remote's volume button.
 

Bronze Member
Username: Locnoir

Post Number: 28
Registered: Aug-06
Thanks, AV! Autoroll is working!
 

New member
Username: Timbob

Post Number: 5
Registered: Dec-07
I've done everything as per Nalin N. suggestions and this is the closest I ever have gotten to getting my system working; however, I get no picture. I get the following message on my TV screen 'waiting for picture' and it just counts up, but nothing. My signal is very strong. What am I missing?
 

New member
Username: Segovia123456789

Post Number: 6
Registered: Dec-07
fried my 2700c with one of these files!
 

New member
Username: Segovia123456789

Post Number: 7
Registered: Dec-07
fried my 2700c with this screw up on that file
 

Bronze Member
Username: Indopak

Post Number: 81
Registered: May-06
ne new bins out that work for a converted fortec??/
 

Gold Member
Username: Nydas

Post Number: 6541
Registered: Jun-06
The latest is CS_233T_lightning.
There is no new BIN since.
This bin works only for DN basic channels - No PPV or internationals.
 

New member
Username: Jatt_5abi

TorontoCanada

Post Number: 2
Registered: Dec-07
can someone plz give me link for CS_233T_lightning
 

Gold Member
Username: Nydas

Post Number: 6544
Registered: Jun-06
http://public.box.net/2500_full_kit
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us