New member Username: Kings2679Mi, Michigan Post Number: 6 Registered: Dec-07 | tell me vs 2000 ultra settings that i can apply on my recvr to start tv |
Silver Member Username: KirankumarNC Post Number: 356 Registered: Oct-07 | munu, there is already a similar thread https://www.ecoustics.com/electronics/forum/home-video/422512.html |
New member Username: Kings2679Mi, Michigan Post Number: 7 Registered: Dec-07 | but i am looking for typical my recvr's antena settings that i cnt set by meself.....the tp freq goes back to default again and again?? |
Silver Member Username: KirankumarNC Post Number: 358 Registered: Oct-07 | were you ever able to get any picture? |
New member Username: Kings2679Mi, Michigan Post Number: 8 Registered: Dec-07 | ya some channels are working up to 270 i think |
Silver Member Username: KirankumarNC Post Number: 359 Registered: Oct-07 | have you loaded the new bin and scanned |
New member Username: Kings2679Mi, Michigan Post Number: 9 Registered: Dec-07 | yes i did but u know now some channel are working some are not i think i need to rescane the channels but the problem is this that it wont go above channel no 273 |
New member Username: Kings2679Mi, Michigan Post Number: 10 Registered: Dec-07 | no ppv & scifi etc is working |
Bronze Member Username: Kings2679Mi, Michigan Post Number: 11 Registered: Dec-07 | i cnt see ppv and 1st channels is there any solution |
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2146 Registered: Sep-06 | munu, most people who try what this guide suggests is getting channels back.. https://www.ecoustics.com/electronics/forum/home-video/422451.html |
Silver Member Username: Jurj1Post Number: 253 Registered: Jul-06 | Alright dude it's a good post but no need to start fu*cking spamming every single thread with it. |
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2149 Registered: Sep-06 | I am not spamming. that guide solves all these problems. a spam message would suggest you buy something.my only goal here is to help users enjoy ther receiver. |
Silver Member Username: RunnerguyPluto Post Number: 936 Registered: Sep-06 | Don't fu@k with Tony!!! |
Silver Member Username: Jurj1Post Number: 255 Registered: Jul-06 | Alright but don't hijack every single thread with it. One post is enough |
Silver Member Username: RunnerguyPluto Post Number: 937 Registered: Sep-06 | |
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2150 Registered: Sep-06 | you are very wrong. I will point each and every user that will find the answer by following the steps in that guide. |
Silver Member Username: Jurj1Post Number: 256 Registered: Jul-06 | Whatever dude, your just going to p1ss everyone the fu*ck off with your bullsh1t. |
Gold Member Username: Donnie1973Post Number: 2380 Registered: May-06 | I have found u dont lose channels with the new files, but pansat... a different story |
Silver Member Username: RunnerguyPluto Post Number: 938 Registered: Sep-06 | I am THE FTA Guru |
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2153 Registered: Sep-06 | Tony my guide is not BS it is the only way to replace missing data and has the recommended procedure for updating a receiver without losing data. why are so upset about someone in a forum helping? |
Silver Member Username: Jurj1Post Number: 257 Registered: Jul-06 | I'm not, one post is enough though, don't you think. Newbies can read and research. |
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2155 Registered: Sep-06 | I understand your position on that. The truth is though newbies will NOT read through the forum to find answers. We have tried for years to get them too. LK was always telling users to read read |
Bronze Member Username: Kings2679Mi, Michigan Post Number: 13 Registered: Dec-07 | where is ppv bin file |