Hi, my echo 110 has no signal(119 is fine), I was wondering if anyone can help. Did it move, if so, which way did it go(LOL, I always wanted to say that) or does anyone have a link to an old thread with the answer? Any help is appreciated...
sorry...I have a pansat 2700a with DN...my problem is actually that I'm missing alot of the movie channels that I had before(ie. channels 503-530. I used channel master with a channel list that I downloaded from another site and I did a blind scan, but I'm still missing those channels for some reason. Please help...
I just did a tp scan but still the same...maybe I'm doing something wrong or something. I currently have only 2 movie channels(502 and 505), but I have all of the other channels though(ie. hbo, sho, max, por*n...etc). Maybe I just need a new channel list or something. Anyway, I just wanna thank your guys for helping.
Dee You are not telling us the truth or you are not reading it right, there is no Freg.12265 listed for Echo 10 or 8.In order for someone here to help you they will need you to post the right info.
One more thing, is the signal dropped? or is it autorolling. If dropped check the lnb and settings, if autoroll then ECM could be issue but from the inital post says sat with no signal.
1. Disconnect the software setting of diseqc from 1 to none and save. 2. Switch off at back. 3. Connect 110W to DisEqC port 2 in software. 4. Blind (power) scan.
Use your judgement and common sense after that (regarding connecting 119 again) if it works
First of all, I would like to apologize for the title because I "DO" have signal for 110. The reason I thought the 110 signal was lost was because the "movie" channels disappeared(channels 503-530s). I DO have all of the other channels including HBO, SHO, MAX, P0rn, etc...
I have a pansat 2700a/DN. So far, I've tried:
*loading bin 227, then blind scan...no luck
*loading bin 228, then blind scan...no luck
*loading factory bin, then bin 228, then blind scan...no luck
*factory reset, load bin 228, then blind scan...no luck
I REALLY appreciate all the help from you guys(THANK YOU!)
I guess all I can do now is hope they magically come back.
dee i am not sure is there any option on ur crapy (just kidding ) option to do an advance scan where u can mannually add tp's frq, etc.. or did u tried channel master..
Sada, yes I've tried channel master but I am not the one to call myself an expert so I might have done it wrong but wouldn't a blind scan correct that. anyway, fugk it, i guess this crapy(possibly kidding) receiver with 30 less channels then before will have to do for now.
Post Number: 100 Registered: Apr-06 Posted on Thursday, December 13, 2007 - 08:20 pm:
-------------------------------------------------------------------------------- Just blind scan, your transponders have changed. Try 10750 if that does'nt load the horrizontals!
) 
