Channels

 

New member
Username: Transformer105

Post Number: 5
Registered: Dec-07
in my previous post i stated how i screwed around with the satelite...now after i changed the atenna settings, some of the channels showed up...but not all, and how do i get them all to show up?
 

Bronze Member
Username: Jack_meoff

Post Number: 41
Registered: Nov-07
Try doing a satellite scan for that particular sat. If you're still missing channels after that, try scanning each individual transponder.
 

New member
Username: Transformer105

Post Number: 6
Registered: Dec-07
there is no faster way? lol
 

Gold Member
Username: Ke5aqn

IF I DONT KNOW THE ANSWER, I WILL FIND...

Post Number: 1838
Registered: Sep-06
AAA,

after you get everything back going make a backup of all your data on a computer. I made a guide HERE to help with this common problem.
 

Bronze Member
Username: Jack_meoff

Post Number: 42
Registered: Nov-07
there is no faster way? lol

Yeah, find a channel list for your receiver and load it....
 

Gold Member
Username: Ke5aqn

IF I DONT KNOW THE ANSWER, I WILL FIND...

Post Number: 1842
Registered: Sep-06
you would have to find a list from your area or you will miss your locals and have some you cant get...
 

Bronze Member
Username: Jack_meoff

Post Number: 43
Registered: Nov-07
Or scan the spotbeam transponders afterward.
 

Gold Member
Username: Ke5aqn

IF I DONT KNOW THE ANSWER, I WILL FIND...

Post Number: 1844
Registered: Sep-06
you could but what a pain just scan the birds
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us