Archive through December 04, 2007
|
Silver Member Username: Oleg1474New port richey, Fl Usa Post Number: 442 Registered: Aug-06 | Update!! -------------------------------------------------------------------------------- This info comes via the New update: The first card less release goes to SPACESTAR!!!! Fully open on DN and BEV. __________________ OlegPHD |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 1252 Registered: Sep-06 |   Not news and not helpfull. No New Bin's for all other receivers including and not limited to, Viewsat, Pansat, Colsat , ALL CLONES |
|
Silver Member Username: Oleg1474New port richey, Fl Usa Post Number: 443 Registered: Aug-06 | Mostly to protect distribution rights. For example, RTPi and Deutche Welle on PAS5 (58 west) are unscrambled since both of these are public information channels transmitted for worldwide distribution and for use by pretty much anyone without fee, much like in the way that NASA TV is a free channel that anyone can redistribute without cost nor license. Dish Network transmits their "Dish Information" barker channel without scrambling - that way, even if a card swap has occurred due to a hack on their security system, when an out of the box receiver powers up for the first time, it gets the barker channel, therefore verifying the correct operation of the receiver. However, Dish Network also transmits many other interesting streams without scrambling, such as their audio channels. Despite the lack of scrambling, they do actually charge for these channels since the Nagravision security system has the ability to "hide" channels from the user if they are not subscribed. With an "official" receiver, the channels can't be received without a subscription and it obviously saves a lot of hardware for scrambling these streams that really are "low value". In effect, this is "Poor Man's" scrambling. |
|
Silver Member Username: Oleg1474New port richey, Fl Usa Post Number: 444 Registered: Aug-06 | During this discussion, keep in mind the two major places where DCII and DVB are used: DCII in the consumer realm where a receiver is hooked up to a motorized dish and DVB in the Dish Network model where an electronic switch is used to switch between stationary dishes pointed at differental orbital locations. So, the fresh receiver gets turned on and due to factory programming and correct installation, is able to receive a "homing" channel. The homing channel contains all the info needed by the receiver to tune any one of the channels that the receiver can receive. In the case of DVB, this means a Network Information Table (NIT - used to tell the receiver about other transport streams - contains frequency, symbol rate, orbital location etc), the Service Description Table (SDT - used to tell the receiver the names and types of programming available on each channel) along with the Time and Date Table (TDT - tells the receiver about programming events on the channels - used to build the electronic program guide). DCII is a little more complicated. First, there's a thing called the Satellite Definition Table (SDT - tells the receiver about the name and orbital locations of satellites), next there's the Modulation Mode Table (MMT - lists the different symbol rate, FEC and modulation types used by DCII) and then the Carrier Definition Table (CDT - this just lists the L-Band frequencies required to tune a channel) followed by the Transponder Defintion Table (TDT - lists the polarity and CDT table index). Finally, the Virtual Channel Table (VCT) is the thing that ties everything together. This lists each channel on the entire DCII system across multiple satellites and contains an index the appropriate TDT, SDT, MMT and CDT tables so that the receiver can select the correct channel analog or digital. If the channel is digital, the VCT also contains the MPEG-2 Program Number (although it's called Service Number in Motorola parlence) so the receiver can process the MPEG-2 PAT and PMT to acutally display the program. Whew! A simpler way to look at the differences is that DVB uses a flat list (much like a comma seperated file with lots of repetition) whereas DCII uses a very relational table structure (much like a SQL database over satellite). What are these DCII modulation types? DVB is pretty straight forward - it's pretty much always QPSK modulation at variable symbol rates and FEC coding. There have been enhancements to the DVB standard to support BPSK, 8PSK and 16QAM modulation modes. BPSK is like QPSK but only transports one bit per time period and is therefore more robust on degraded links. 8PSK and 16QAM increase the data rate by using more than two bits per time period but require a much more robust link than QPSK. DCII has a number of different modes. First, there's regular-QPSK and Offset-QPSK. Offset-QPSK is quite similar to normal QPSK but one of the bits in the symbol is delayed by one bit period and phase changes are limited to 90 degrees, making performance in a non-linear environment much better than QPSK. All DCII signals with a symbol rate less than 19.51 MSps use OQPSK - anything above uses QPSK. In the DCII system, the encoders and receivers have pre-programmed symbol rates. For example, the 3.25 MSps rate supports one 576x480 video stream and one audio stream; the 4.88 MSps rate supports two 352x480 video streams and associated audio streams and so on. There's one other variable for a DCII signal - it's mux mode. As you probably know from reading this document, the higher the symbol rate, the higher the actual bitrate that can be carried across the channel but this also depends on the FEC coding rate - the less fraction of the datarate used for error correction, the higher still the bitrate, so a 19.51 MSps 3/4 stream carries less data per second than a 19.51 MSps 7/8 stream. In regular QPSK, the data is recovered from both the I and Q phases that make up a QPSK symbol, i.e. each bit on the I and Q phases ends up as a serial bit in the transport stream. Because of limitations in either the QPSK demodulator or the transport stream demultiplexor, most DCII streams with a rate above 19.51 MSps 4/5 FEC coding operate in "split" mode. In split mode, the I phase contains a transport stream and the Q phase contains another different transport stream. It's not really true QPSK but more like dual-BPSK. The Mode Modulation Table sent as part of the DCII SI contains an indication as to whether the transmission is using QPSK or OQPSK and whether it's the regular "combo" mode or split mode. Thanks to Mark Hemstad for info about OQPSK. There is one exception to this rule. Some DCII signals use a symbol rate of 29.27 MSps and yet operate in combo mode. One assumes that Motorola was able to correct the limitations that caused them to invent split mode, however, the bad news is that the only receiver that can do this high-speed mode (Motorola calls it MegaStream) is the DSR-4800 which is an expensive commercial receiver. It's worth pointing out that CBS uses MegaStream for it's HDTV network feeds which explains why they can't be received by consumer DCII receivers and the 4DTV HD decoder. What's the "channel map" issue with DCII? Remember when you first turn on a new DCII consumer receiver, it needs to be tuned to a homing transponder so it can download all the appropriate tables that allow it to tune channels. Because 4DTV receivers don't allow manual control of the tuning and video parameters, the only way for a receiver to get told what channels are out there is for Motorola to include them in the channel maps they send on the homing transponders. Motorola used to be quite friendly towards the 4DTV receiver owner and included many channels such as PBS's PBS You and PBS Kids as part of the 4DTV channel maps. However, despite their unscrambled transmission on satellite, PBS insisted that Motorola remove them from the maps being sent to 4DTV receivers and as a result, 4DTV receivers can only tune one of the many PBS feeds that are available and free-to-air. The only known solution to this problem is to use a program called 4Play developed by the author. It works very well with the DSR-905 digital-only DCII receiver, but also supports the DSR-920 and DSR-922 receivers with some limitations. It can add about 50 or so unscrambled channels to the receiver's maps. You can read more about 4Play and download it for free from this link. Why exactly can't DCII receivers receive DVB and vice-versa? Although both DCII and DVB have exactly the same performance, their differences, especially in the area of transmission standard, prevent DCII receivers from receiving DVB and DVB receivers from receiving DCII. This table shows the differences between the two systems: DCII DVB Transmission Format QPSK/dual BPSK QPSK Randomization After interleaver using a truncated 2^16 bit polynominal sequence Before Reed-Solomon coding using a truncated 2^13 polynominal sequence Reed-Solomon Coding DCII polynominal DVB polynominal Interleaving Convolutional I=12, J=19 Convolutional I=12, J=17 Convolutional Encoding Length 7 (64-state Viterbi trellis) Length 7 (64-state Viterbi trellis) Puncturing rate 1/3 underlying 1/2 underlying QPSK shape Butterworth pulse shaping Square-root-raised-cosine pulse shaping Multiplex MPEG-2 standard MPEG-2 standard System Information DCII (similar to ATSC with extensions) DVB Audio Dolby Digital (AC3) Musicam (MPEG-1 layer 2) or AC3 Video MPEG-2 standard 4:2:0 (MP@ML) MPEG-2 standard 4:2:0 (MP@ML) |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 1260 Registered: Sep-06 | That  is from :: http://www.coolstf.com/mpeg/ go read it you also will find it and...its from 1997 thats right the year 1997! |
|
Silver Member Username: Oleg1474New port richey, Fl Usa Post Number: 445 Registered: Aug-06 | What are the technical differences between DSS and DVB transmissions? DSS DVB Transmission Format QPSK QPSK Viterbi Code Rates 1/2, 2/3, 6/7 1/2, 2/3, 3/4, 5/6, 7/8 Multiplex Proprietary - MPEG-2 like (has PIDs) MPEG-2 standard System Information Proprietary DVB Audio Musicam (MPEG-1 layer 2) or AC3 Musicam (MPEG-1 layer 2) or AC3 Video MPEG-2 standard 4:2:0 (MP@ML) MPEG-2 standard 4:2:0 (MP@ML) |
|
Silver Member Username: Oleg1474New port richey, Fl Usa Post Number: 446 Registered: Aug-06 | NOTICE Over the past year or more, a new trend has emerged that is probably too good to be true. You may have heard names like "BLACKBIRD", "SILVERBIRD", "SILVER BULLET" and others, applied to MPEG-2 receivers that claim to be capable of receiving subscription programming free of charge. Certain promoters have even claimed the idea that such reception is legal. Numerous receivers have been modified by unscrupulous people hoping to make a fast buck on the greed of certain folks that still believe that you can beat the system and that premium television is something that you should not have to pay for. Common sense should tell you otherwise. Laws are now on the books in both the United States and Canada that list heavy fines and even prison time for stealing programming. It's not a joke any more, and if you are foolish enough to buy into the idea that you can permanently avoid paying for satellite channels that normally require payment of a subscription, an expensive lesson may be in your future. If this is not enough to make you think twice about beating the system with modified equipment, think about this: Two of the largest companies affected by such hacking (Bell ExpressVu in Canada and DISH Network in the United States) are continually updating their security systems, so the prospect of getting these channels without cost in the future will be quite limited. Rest assured that both companies will eventually get their "leaks" under control, just as DirecTV did after implementing tougher security measures. |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 1262 Registered: Sep-06 |  |
|
Silver Member Username: Oleg1474New port richey, Fl Usa Post Number: 451 Registered: Aug-06 | RECEIVER CURRENT VERSION PREVIOUS VERSION SOFTWARE DOWNLOAD INSTRUCTIONS VERSION RELEASE DATE VERSION RELEASE DATE 1000 8.45P 10/23/2007 8.43P 1/10/2007 Click Here 111 P2.78 2/14/2007 P2.77 2/9/2006 Click Here 2700/2800/3700 8.62P 5/24/2007 8.61P 2/7/2007 Click Here 3000 8.67P 10/18/2007 8.66P 1/11/2007 Click Here 301 P3.92, P3.46 3/15/2007 P3.91, P3.45 2/13/2007, 2/8/2007 Click Here 311 P4.19 10/23/2007 P4.17 8/23/2007 Click Here 322 L4.22 6/7/2007 L4.21 1/25/2007 Click Here 351 P3.73 8/2/2007 P3.72 5/31/2007 Click Here 3750 1.19P 11/29/2007 1.18P 8/30/2007 Click Here 3800/3900 P3.53 7/31/2007 P3.52 1/9/2007 Click Here 381 P4.20 10/30/2007 P3.88 5/24/2007 Click Here 4000 8.49P 10/24/2007 8.48P 1/10/2007 Click Here 4700/4900 P3.26 8/1/2007 P3.25 3/15/2007 Click Here 5000 8.70P 1/10/2007 8.19P 4/13/2006 Click Here 501/508/510 P4.01, P4.00, P3.69 10/23/2007, 9/19/2007, 5/18/2007 P3.68 3/13/2007 Click Here 522 L4.63, L4.62 11/28/2007, 10/16/2007 L4.61 8/7/2007 Click Here 6000 8.56P 1/18/2007 8.55P 4/19/2006 Click Here 625 L4.63, L4.62 11/28/2007, 10/16/2007 L4.61 8/7/2007 Click Here 7100/7200 1.31P 10/24/2007 1.30P 1/25/2007 Click Here 721 L3.26 5/29/2007 L3.25 4/26/2007 Click Here 811 P4.20 10/30/2007 P3.88 5/24/2007 Click Here 921 L3.32 3/30/2007 L3.31 3/13/2007 Click Here 942 L2.89 1/30/2007 L2.88 6/29/2006 Click Here IRR 8.23P 1/16/2007 8.22P 1/4/2006 Click Here POCKETDISH AV402E 1.1.25 6/1/2006 1.1.24 2/24/2006 Click Here POCKETDISH AV500E 1.0.61 6/1/2006 1.0.60 2/24/2006 Click Here POCKETDISH AV700E 1.1.60 6/1/2006 1.1.49 2/24/2006 Click Here Q-BOX 002E N/A 001E 1/22/2007 Click Here VIP211/ DISH 411 L4.34 10/9/2007 L4.33 9/18/2007 Click Here VIP222 L3.02 10/2/2007 L3.01 3/8/2007 Click Here VIP622 L4.47 10/30/2007 L4.45 10/9/2007 Click Here VIP722 L4.47 10/30/2007 L4.46 10/17/2007 Click Here WEBTV CLIENT 17015 8/30/2005 17014 6/8/2005 Click Here |
|
Silver Member Username: Oleg1474New port richey, Fl Usa Post Number: 452 Registered: Aug-06 | Headlines for 12/02/2007 DIRECTV - Software Updates: H20-100: 0x204C - Staggered National Release - Release Notes D11-300: 0x1069 - Staggered National Release - Release Notes HR21-700: 0x18F- Full National Release - Release Notes R15-300: 0x10C1 - Staggered National Release - Release Notes |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 1267 Registered: Sep-06 | To receive satellite broadcast signals, your satellite dish needs to be positioned correctly. You can do this yourself. Determining the Elevation and Azimuth The satellites are "parked" approximately 22,300 miles above the equator. In reality, the satellites travel from west to east, but to us on Earth they appear stationary because they match the exact speed of the Earth's rotation. (This is a geostationary orbit.) If you stand up now, turn towards the southern hemisphere, and tilt your head up to the heavens, you'll be looking in the general direction of our satellite To calculate the azimuth and elevation angle for your location, you may click on this Azimuth/Elevation link. We implemented this software on our website and the link will now always work. You ou can download this small look.exe file from this website which can run on your PC. azimanim.gif (9366 bytes) Azimuth Elevation Elevation Reading Now that you have your azimuth and elevation coordinates, what do you do with them? First, survey the site to ensure an unobstructed view in the direction of the satellite. To receive broadcast signals, your satellite dish needs to be positioned correctly. Mount your satellite dish so that the base fits flush with the mounting surface (level if mounted on a flat beam or roof, or on an angle to match the pitch of your roofline). When you have securely mounted your satellite dish, adjust your dish so that the dish mast is plumb, that is, exactly perpendicular to level - this is best achieved using a carpenter's level. With your dish now mounted and properly set, you are now ready to aim your dish toward the satellites. To set the dish to point up to the satellites, you'll first need to set the elevation. Then you'll point the dish in the proper left-to-right position, to set the azimuth. You'll need to refer to the installation manual for your system for detailed instructions, but here's the short course. Setting the Elevation (UP), (DOWN) You can set the proper elevation after the dish is securely mounted. First, loosen the nuts securing the two elevation bolts so that the dish easily moves up and down. Line up the elevation indicator with the tick mark corresponding to your elevation number. Then tighten the bolts. You may need to readjust the elevation up or down slightly to get the best signal. See figure on top. Setting the Azimuth (LEFT), (RIGHT) Loosen the azimuth nuts on the LNB arm enough that the dish can be turned smoothly with little pressure. Set the azimuth by moving the dish left and right. Point the dish in the general direction of the satellite, in the southern hemisphere. By using a compass you can better pinpoint the direction with your azimuth number to correspond with the degrees on your compass. See figure on top. Acquiring the Signal Now your dish will be in position to lock in on the satellite signal. You'll need to 1) have your digital receiver connected to your television, with both turned on, and 2) have your antenna LNB to receiver cables connected, and 3) be viewing your Setup Antenna/Signal Strength display from your digital receiver's on-screen menu to measure the signal strength accurately. To view the signal strength and quality (Satcruiser receivers Telstar 5 for example) press Menu, Installation, TP Configuration, select Telstar 5 and frequency 12152 or frequency 11898. Ask a helper to watch the Signal Strength screen for indications you are receiving the signal, the upper meter is the signal strength, the lower meter is the signal quality. Please note that you will receive the signal ONLY when there is a signal on the lower meter (signal quality). Stand behind the dish, and holding its outer edges, slowly turn it a little to the right to adjust the azimuth. Pause a few seconds, giving the receiver enough time to lock in on the satellite signal. Continue turning the dish in this way until you have acquired the signal or until you have rotated the dish approximately 15 degrees from the starting point. If you haven't detected a signal yet, return to the starting point and move the dish to the left again. If you don't acquire the signal after rotating the dish approximately 15 degrees to either side of the calculated azimuth angle, loosen the elevation bolts and tilt the dish upward so the elevation indicator moves halfway from the current tick mark to the next mark. Then tighten the elevation bolts. If necessary, continue changing the elevation in half-tick-mark increments until you receive the signal. After tilting the dish upwards three tick marks beyond the original tick mark, return it to the original tick mark and then tilt it down a half tick mark. Keep repeating this until you receive the signal. If the Signal still eludes you, check: Check to make sure that the mount is 100% level. The portion that the dish mounts on must be straight up to the sky level. Otherwise you will not be able to find the signal That nothing--a tree, for example--obstructs the signal that the cables are connected properly to the receiver. That you have the correct azimuth and elevation coordinates Fine Tuning Now that you have received the satellite signal, it is important to fine tune the dish pointing to make sure you have the maximum possible signal strength. Maximizing the signal is important, in that, it reduces "rain fade" during inclement weather. Loosen the elevation bolts, then gently continue turning the dish a little in the same direction you were turning it when you began to receive the satellite signal. Pause for a few seconds each time after moving the dish. Turn the dish in this way until the signal quality strength reaches its highest reading and then begins to fall. Then slowly turn the dish the opposite way until you again receive the highest reading on the Signal Strength screen. Important: The Signal Strength reading does not need to be "100." Lock in on the highest possible signal. Tighten the azimuth bolts. Loosen the elevation bolts. Slowly tilt the dish up and down to improve the Signal Strength reading. When you are satisfied that you have the strongest signal, tighten the elevation bolts. |
|
Silver Member Username: HaloToronto, Ontario Canada Post Number: 198 Registered: Oct-07 | wow FTA Tester and Oleg having a war!!! |
|
Silver Member Username: HaloToronto, Ontario Canada Post Number: 199 Registered: Oct-07 | |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 1274 Registered: Sep-06 |   |
|
Silver Member Username: Ather_da_donMississauaga, Ontario Canada Post Number: 131 Registered: Oct-07 | Newest Dish keys at |
|
Bronze Member Username: SkeptikArtica Post Number: 13 Registered: Oct-07 | Hello Nalin....I know your laying low avoiding this now ifested SPAM site. We are still very much in need of your USEFUL info. I hope you post soon, your always insightful. You have always been greatly appreciated. Thanks |
|
Bronze Member Username: MaroPost Number: 87 Registered: May-06 | sonicyiew bin is out |
|
Bronze Member Username: MaroPost Number: 88 Registered: May-06 | sonicview bin is out |
|
Silver Member Username: LeafsPost Number: 117 Registered: Oct-07 | visit |
|
New member Username: AmaazouzLavalCanada Post Number: 2 Registered: Nov-07 | james bond ... We really don't care about this fk keys ... |
|
New member Username: RatiraoPost Number: 5 Registered: Nov-07 | How do i split dish signal from wall to viewsat and original receiver? so during black days i can still watch whatever i could get from original dish unit? Thanks |
|
Gold Member Username: NydasPost Number: 5523 Registered: Jun-06 | Rati Kaur: You can't from the wall. Please start a new thread and ask there. This thread is for keys and BIN announcements. |
|
Gold Member Username: NydasPost Number: 5524 Registered: Jun-06 | Sonicview BINs announced at [link removed] |
|
Gold Member Username: Dude123Post Number: 1372 Registered: Jul-06 | Viewsats are out aswell....and pansat 3500 at future-fta.info |
|
Gold Member Username: NydasPost Number: 5526 Registered: Jun-06 | Viewsat files and Sonicview files - Fast access and download from |
|
New member Username: Shawn23Post Number: 4 Registered: Sep-07 | wheenn is the bin for CS6000 coming out!?!?!!?!?!??!?! take forever.. i'm dying without tv |
|
Gold Member Username: NydasPost Number: 5529 Registered: Jun-06 | Please don't ask. As soon as there is news of new BINs or new Keys somebody will post them. THANKS. |
|
Bronze Member Username: SwredneckHalifax, N.s. Canada Post Number: 23 Registered: Jul-07 | lololololololololol |
|
Silver Member Username: HaloToronto, Ontario Canada Post Number: 200 Registered: Oct-07 | |
|
Gold Member Username: NydasPost Number: 5535 Registered: Jun-06 | Somebody scammed away "subscription money from one of the members here. There are a lot of similar scams going on. There are at least 3-4 scammers posting in this forum enticing you to their site and then once you become a free member, they make it difficult to access and entice you to become a member. I AND SOME OTHERS TRY TO FOB THEM OFF WHEN WE SEE THEM. BUYER BEWARE |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 1338 Registered: Sep-06 | Well said nalin  |
|
Silver Member Username: HaloToronto, Ontario Canada Post Number: 201 Registered: Oct-07 | who are the 3-4 scammers????? |
|
Silver Member Username: Ather_da_donMississauaga, Ontario Canada Post Number: 132 Registered: Oct-07 | new bins at |
|
Gold Member Username: NydasPost Number: 5547 Registered: Jun-06 | https://www.ecoustics.com/electronics/forum/home-video/410361.html Do you know of any? Read the thread started by Kate about being scammed.... |
|
Gold Member Username: NydasPost Number: 5549 Registered: Jun-06 | There are a lot of similar scams going on. There are at least 3-4 scammers posting in this forum enticing you to their site and then once you become a free member, they make it difficult to access and entice you to become a member. I AND SOME OTHERS TRY TO FOB THEM OFF WHEN WE SEE THEM. BUYER BEWARE |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 1343 Registered: Sep-06 | Alway's try the "home" sites for your receiver FIRST the newest bin's and info will always be their first! Never Pay for information from sites its alway's FREE at forum's listed below! Total FTA-Viewsat HOME SITE: [link removed] (C00LSAT and All receivers) DSS Newbies: [link removed](Pantecs,all clones and all receivers) [link removed] |
|
Silver Member Username: HaloToronto, Ontario Canada Post Number: 203 Registered: Oct-07 | well Nalin check it out gimme feed back! |
|
Gold Member Username: NydasPost Number: 5556 Registered: Jun-06 | All new Pansat BINs are out and available at |
|
Silver Member Username: HaloToronto, Ontario Canada Post Number: 204 Registered: Oct-07 | even clone bin files!!!?????? |
|
Gold Member Username: NydasPost Number: 5557 Registered: Jun-06 | Viewsat files and Sonicview files - Fast access and download from [link removed] C00LSAT BINs are not available yet. Check at the official cool sat site [link removed] Buzz and Satpro were announced, but I am not sure about their authenticity. Other sites for files: [link removed] |
|
Bronze Member Username: LamisPost Number: 19 Registered: Nov-07 | hi NALIN can u help me plz i don't know how to transfert the new bin to my recever |
|
Silver Member Username: HaloToronto, Ontario Canada Post Number: 205 Registered: Oct-07 | are the pansat clone bins out???????? |
|
Gold Member Username: NydasPost Number: 5559 Registered: Jun-06 | zahralamis: Please ask in a separate thread identifying the receiver and the other tools you have. Master Chief : All releases are documented just above. |
|
Bronze Member Username: LamisPost Number: 21 Registered: Nov-07 | nyda where ,..............plz |
|
New member Username: NsinhaRochester Hills, MI USA Post Number: 4 Registered: Nov-07 | Bin file from |
|
Bronze Member Username: LamisPost Number: 22 Registered: Nov-07 | excuse to me NALIN but I do not know how to make is what I must light the recever and right after typing on Write bin or proceeding in another manner |
|
Gold Member Username: NydasPost Number: 5564 Registered: Jun-06 | zahralamis : I have started your thread. Now PLEASE go there. Not here. https://www.ecoustics.com/electronics/forum/home-video/410491.html |
|
Bronze Member Username: Americanistar9Post Number: 20 Registered: Jan-07 | NALIN... hi sorry for the bother, I cant find the new bin for Pansat2500A. do u know in which site its available? THANKS! |
|
Gold Member Username: NydasPost Number: 5568 Registered: Jun-06 | There are NOT going to be any more Pansat 2500A files....NEVER. NEVER. That was announced several months ago. If you want to you can convert to Pansat 2700 work-a-like. There are no new file out yet, but I will be posting an update on my thread for conversion. New BINs and other info in this thread. https://www.ecoustics.com/electronics/forum/home-video/410484.html |
|
Bronze Member Username: Americanistar9Post Number: 22 Registered: Jan-07 | Oh wait! im sorrry NALIN, so if the bin before this was working for me, that means that i had it converted or something? so the only thing i need now is a what? THANKS! |
|
Bronze Member Username: Rainman62Post Number: 54 Registered: Nov-06 | C00lsat 7000PVR bin is out. Still waiting for the 5000 and 6000. |
|
Bronze Member Username: Rainman62Post Number: 55 Registered: Nov-06 | C00lsat 6100 & 7100 bins are out. |
|
Gold Member Username: Dude123Post Number: 1398 Registered: Jul-06 | Go to F2ATV.com for all C00Lsat files..... |
|
Silver Member Username: Ather_da_donMississauaga, Ontario Canada Post Number: 133 Registered: Oct-07 | new bins and keys at |
|
Gold Member Username: NydasPost Number: 5579 Registered: Jun-06 | Pansat 2700 clone BIN 225v1 Tivo is out suitable for Pansat 2700 clones and original. NOT SUITABLE FOR 2500/FLU TO 2700 CONVERSIONS. Go to Files/Fortec files at [link removed] |
|
Gold Member Username: NydasPost Number: 5580 Registered: Jun-06 | Pansat 2700 clone BIN 225v1 Tivo is out suitable for Pansat 2700 clones and original. NOT SUITABLE FOR 2500/FLU TO 2700 CONVERSIONS. Go to Files/clone file/ Pansat clones [link removed] This one is to be used for the Conversion. It is not suitable for original Pansat 2700 or for clone Pansat 2700. CS_225T_Lightning_100t_Series_serial.zip [link removed] Go to Fortec section. Also many urls at: https://www.ecoustics.com/electronics/forum/home-video/410576.html |
|
Gold Member Username: NydasPost Number: 5581 Registered: Jun-06 | CW 600s, 600P and 800 files are out and available at [link removed] [link removed] |
|
Bronze Member Username: SwredneckHalifax, N.s. Canada Post Number: 24 Registered: Jul-07 | sorry bto bother u nalin but where do i get afile for a sonicveiw 1000 plz |
|
Gold Member Username: NydasPost Number: 5600 Registered: Jun-06 | Sonicview files are available at: [link removed] |
|
Silver Member Username: LeafsPost Number: 118 Registered: Oct-07 | visit |
|
Silver Member Username: Ather_da_donMississauaga, Ontario Canada Post Number: 134 Registered: Oct-07 | new bins and keys at |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 1410 Registered: Sep-06 | With most all receivers working with autoroll on posting a link to a pay-for-info site with key's id pointless...... Alway's try the "home" sites for your receiver FIRST the newest bin's and info will always be their first! Never Pay for information from sites its alway's FREE at forum's listed below! Total FTA-Viewsat HOME SITE: [link removed] (C00LSAT and All receivers) DSS Newbies: [link removed](Pantecs,all clones and all receivers) [link removed] |
|
New member Username: SennisPost Number: 8 Registered: Aug-07 | Where can i find Bev Keys, is there a alternative site? |
|
Silver Member Username: HaloToronto, Ontario Canada Post Number: 206 Registered: Oct-07 | new bins and dish keys @ |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 1413 Registered: Sep-06 | steve, whats your receiver? most do autoroll and have the key's working.... |
|
New member Username: SennisPost Number: 9 Registered: Aug-07 | my Reciever is the Captive Works cw600 Premium i updated to the 1.59 bin, and the keys i entered in was these : 86: 8E 01 FE 27 88 9F 83 CB C4 AD 85 8C FE 5C 2A 10 96: A7 D5 55 6D 1E B9 3C 9E 57 FA 70 1D EA C2 C5 87 New but still a no go, autoroll on |
|
Silver Member Username: Leafs_fan_4_evajammin wit Jamario MO..., Post Number: 217 Registered: Jun-06 | FTA TESTER or Nalin I am also missing BEV on VS Xtreme (got the file from Totalfta yesterday) . I think i have the latest keys. One question, do we have to put in all the keys for 801, 901,905,906,907? Thanks |
|
Bronze Member Username: ClimesPost Number: 13 Registered: Aug-07 | hey boys, still no new bin for the C-SAT 5000? |
|
Silver Member Username: LeafsPost Number: 122 Registered: Oct-07 | visit |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 1431 Registered: Sep-06 | go raps go, make sure you are pointed at BEV, you have the correct bin, and let the key's autoroll... James Bond, Who are you trying to help here? Most all receivers are autorolling with the new key's for this ECM change and the ones that don't are autorolling as well just arnt getting some channels so NO ONE NEEDS KEY"S Please don't post a link to your site every 15 min its useless.. |
|
Silver Member Username: Ather_da_donMississauaga, Ontario Canada Post Number: 135 Registered: Oct-07 | new bins and keys at |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 1449 Registered: Sep-06 | ALL USERS PLEASE BE CAREFULL VIRUS"S HAVE BEEN FOUND AT THAT SITE!! Alway's try the "home" sites for your receiver FIRST the newest bin's and info will always be their first! Never Pay for information from sites its alway's FREE at forum's listed below! Total FTA-Viewsat HOME SITE: [link removed] (C00LSAT and All receivers) DSS Newbies: [link removed](Pantecs,all clones and all receivers) [link removed] |
|
Bronze Member Username: Rainman62Post Number: 56 Registered: Nov-06 | Any prediction when C00lsat 5000 & 6000 bins will be released? |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 1452 Registered: Sep-06 | Yes it will be out the second tuesday of next week. |
|
Bronze Member Username: Shawn23Post Number: 15 Registered: Sep-07 | loooool r u serious |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 1458 Registered: Sep-06 | No one knows well mabee one does but he is  stares LoL |
|
Silver Member Username: HaloToronto, Ontario Canada Post Number: 207 Registered: Oct-07 | new bins and dish keys @ |
|
Silver Member Username: Ariana_70Sorel-Tracy, Quebec Canada Post Number: 109 Registered: Aug-06 | can anyone tell me if by downloading the new bin for SV1000 the ppv chanels and others freezes?? |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 1463 Registered: Sep-06 | Monica this is a thread for new key's if you have a question about a receiver please go make a new thread. |
|
Silver Member Username: Ariana_70Sorel-Tracy, Quebec Canada Post Number: 110 Registered: Aug-06 | i am very sorry THE FTA TESTER, indicate how can i post my question about the new bin i downloaded to my receiver, to see if is only me who is having this problem , or is a glitch that comes with that new bin ...??this is the very first time that in this site they tell me to go to another thread....please indicate were or the how to do that. |
|
Gold Member Username: NydasPost Number: 5619 Registered: Jun-06 | Everything you need for 2500/Flu to 2700 conversion in one package. Instructions included. http://public.box.net/2500_full_kit |
|
Silver Member Username: Ariana_70Sorel-Tracy, Quebec Canada Post Number: 111 Registered: Aug-06 | Nalin can you tell me please with out kicking me out of this threat if you had had other members telling you that by downloading the bin for the SV1000 the ppv channels and other channels as well frizze up or do you know if that bin has a glitch or something not running well ? |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 1472 Registered: Sep-06 |   |
|
Gold Member Username: NydasPost Number: 5625 Registered: Jun-06 | Monica : Sonicview 1000 had a file out yesterday. There were "micro freezes." This morning there is a later version and the freezes are supposed to be gone. [link removed] [link removed] I have seen these "micro-freezes on a sonicview 4000 and have seen them corrected this afternoon with the latest version of today. |
|
Silver Member Username: Ariana_70Sorel-Tracy, Quebec Canada Post Number: 113 Registered: Aug-06 | ok MR THE FTA TESTER..i have posted a new thread were you told , i hope someone helps me out with my question.} |
|
Silver Member Username: Ariana_70Sorel-Tracy, Quebec Canada Post Number: 114 Registered: Aug-06 | thank you ....thank you Nalin , i'll download again the bin , thank you again , and thank you for al the nice work you are doing here and for been here for us .....us people that know sh.. about this ...thanks for been here. |
|
Silver Member Username: Ather_da_donMississauaga, Ontario Canada Post Number: 136 Registered: Oct-07 | If you want new dish keys or new BIN files for Pansat, Viewsat, C00lSAT, etc., visit |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 1477 Registered: Sep-06 | All these people coming in this thread are trying to get you to hit their site for add money from Google ads. The sites they push have no information not found in the safe recommended forums. Alway's try the "home" sites for your receiver FIRST the newest bin's and info will always be their first! Never Pay for information from sites its alway's FREE at forum's listed below! Total FTA-Viewsat HOME SITE: [link removed] (C00LSAT and All receivers) DSS Newbies: [link removed](Pantecs,all clones and all receivers) [link removed] |
|
Gold Member Username: NydasPost Number: 5634 Registered: Jun-06 | It is best to go to the "home" locations of various receivers. Viewsat files and Sonicview files - Fast access and download from [link removed] Ariza files at [link removed] CaptiveWorks files at [link removed] Other sites for files: [link removed] |
|
Bronze Member Username: JaggaPost Number: 36 Registered: Oct-06 | Hello friends, I used the following method to convert my Pansat 2500 clone to 2700. I understand that this way I can continue to use my existing receiver without having to purchase a new one. 1. Open/Run the Blacklist updater 2. Make sure BIN is Selected not BOOT you are writing a Bin 3. Click select BIN 4. Choose j27_205_1.bin 5. Reboot reciever, on first light/dash, Click write bin. let it write When it is done, Be PATIENT!!!! let it reboot after 2-3 minutes you will see B-75 Flash on display of reciever. <- THIS IS WHERE I GET STUCK!!! I AM UNABLE TO DOWNLOAD THE FILE. THERE IS 0% DOWNLOADING PROGRESS FOR THE LAST 30 MINUTES. AM I DOWNLOADING THE CORRECT FILE? 6. Click select BIN 7. Choose jvvh_208_1.bin 8. Reboot reciever on first light Click write bin. let it write. let it reboot after 1 minute you will see B-75 Flash on display of reciever. <- SAME PROBLEM AS DESCRIBED ABOVE 9. reconnect to Tv, select default key from parental options(key menu) let it roll 10. wait for next round |
|
Silver Member Username: LeafsPost Number: 123 Registered: Oct-07 | visit |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 1482 Registered: Sep-06 | All these people coming in this thread are trying to get you to hit their site for add money from Google ads. The sites they push have no information not found in the safe recommended forums. Alway's try the "home" sites for your receiver FIRST the newest bin's and info will always be their first! Never Pay for information from sites its alway's FREE at forum's listed below! Total FTA-Viewsat HOME SITE: [link removed] (C00LSAT and All receivers) DSS Newbies: [link removed](Pantecs,all clones and all receivers) [link removed] [link removed] Ariza files at [link removed] CaptiveWorks files at [link removed] Other sites for files: [link removed] |
|
Silver Member Username: LeafsPost Number: 124 Registered: Oct-07 | fta tester i would just like to add we have keys on our websites... and many of those websites you gave if you didn't notice also have ads on them .... |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 1483 Registered: Sep-06 | That is fine James the only thing your site has is key's. Key's are not needed now all receivers are autorolling if they are not putting keys in will not solve anything. If you want to come here and post the latest key's thats great this thread is for new key's not posting links to your site to trick users to it so you can drive up your ad count and make money. I will always be here to combat you and all the spammers who are just out to make money from our users. If you are not interested in making money and just want to inform our users of the newest keys then just post the keys not a link to your ad riddled page with key's. I have reported you to google adsence and the google web hosting service department. |
|
Silver Member Username: Ather_da_donMississauaga, Ontario Canada Post Number: 137 Registered: Oct-07 | If you want new dish keys or new BIN files for Pansat, Viewsat, C00lSAT, etc., visit |
|
Bronze Member Username: SwredneckHalifax, N.s. Canada Post Number: 25 Registered: Jul-07 | nalin i went to that site u said for sonic view and it just says about the 4000 i got a 1000 would it be the same bin? |
|
Gold Member Username: NydasPost Number: 5638 Registered: Jun-06 | jerry bennett : At SonicView 932 viewings) SV1000_V0277P Micro Freeze. by Tessey SonicView Common Files (4 Viewing) Common files for all SonicView stb's SonicView Softkey Maker 2.03 by nixon_r 08-22-2007 SV1000 files (7 Viewing) SV1000_V0277P Micro Freeze.by Tessey SV1000 PVR files (1 Viewing) PVR1000_V0163P Micro Freeze.by Tessey SV4000 files (14 Viewing) SV4000_V0180P Micro Freeze.by Tessey SV8000 HD files (6 Viewing) HD8000_V0236P Micro Freeze.by Tessey **-- **-- **-- **-- **-- **-- **-- **-- **-- **-- **-- **-- On the main page of Sonicview Receiver Files This area is for files only. Please place discussions in discussion forum. Sonicview 1000 Files Sonicview PVR Files Sonicview 4000 Files Sonicview 8000 Files So how could you miss? |
|
Gold Member Username: NydasPost Number: 5639 Registered: Jun-06 | Jagga Singh: "5. Reboot reciever, on first light/dash, Click write bin. " That is wrong. My instructions for jv_205_1 or for jvvh_208_2500to2700.bin are: " Left hand ready on switch of receiver and right hand ready on Mouse pointing to 'Write BIN' Switch on and IMMEDIATELY CLICK 'WRITE BIN' " jvvh prefers you start with the jvvh_208_2500to2700.bin Everything you need for 2500/Flu to 2700 conversion in one package. Instructions included. http://public.box.net/2500_full_kit |
|
Bronze Member Username: Rainman62Post Number: 57 Registered: Nov-06 | Bin 156 for C00lsat 5000 is out but it does not work on DN. In fact after loading 156, if you do "version check" you get 1.51 Bev are back with bin 148 and above on CS5000 |
|
Silver Member Username: Pannu16Post Number: 605 Registered: May-06 | it does work for DN!! |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics