B3v or dn?

Mimi Bronze Member Username: Ela29 Post Number: 11 Registered: Aug-07	Posted on Tuesday, December 04, 2007 - 22:19 GMT Hi ev1 I'm really new at this,and please someone can tell me what should I do to get the DN instead of B3V Thank you
Pulp Fiction O Silver Member Username: Pulp_fiction Post Number: 526 Registered: Nov-07	Posted on Tuesday, December 04, 2007 - 22:34 GMT move the dish
bruce l Silver Member Username: Brucester Post Number: 707 Registered: Jul-06	Posted on Tuesday, December 04, 2007 - 22:45 GMT stand in back of the dish move it to the right about a foot and it will tell you on your box what sat you found move it around till it hits echostar110w and that is dish you might have to lift the dish up and down to get better single or by a sat finder
Tooter Silver Member Username: Dimwitt Post Number: 264 Registered: Aug-06	Posted on Tuesday, December 04, 2007 - 23:02 GMT ~~www.dishpointer.com~~
aanaa Silver Member Username: Aanaa Post Number: 200 Registered: Mar-05	Posted on Tuesday, December 04, 2007 - 23:20 GMT move the dish to 91 or 82 for bev international
aanaa Silver Member Username: Aanaa Post Number: 201 Registered: Mar-05	Posted on Tuesday, December 04, 2007 - 23:20 GMT then load the nimiq 1.2 or 2 accordingly
Jack Meoff New member Username: Jack_meoff Post Number: 4 Registered: Nov-07	Posted on Tuesday, December 04, 2007 - 23:23 GMT To get DN?????
Nalin Nyda Gold Member Username: Nydas Post Number: 5698 Registered: Jun-06	Posted on Wednesday, December 05, 2007 - 03:42 GMT Jack Meoff: DN has Echo 119w and Echo 110w. BEV has Nimiq 91W and Nimiq 82W Did you notice the 9 degree spread between the two popular sats of each of the providers? If you are already set up and have a twin or two LNBs on one Dish and it is set up to the DN combo, you can move (swing right/left) 28 degrees to go to BEV combo and vice versa. You may need to make a slight vertical adjustment.
omar nabil Bronze Member Username: Omar_nab Post Number: 22 Registered: Oct-07	Posted on Wednesday, December 05, 2007 - 03:51 GMT hi nalin wich bin work now for pansat 2500a converted to 2700 i upload the new 225t et worked but it down please help}}}
Nalin Nyda Gold Member Username: Nydas Post Number: 5700 Registered: Jun-06	Posted on Wednesday, December 05, 2007 - 03:55 GMT It will not work for BEV channels now but should work for DN channels.
omar nabil Bronze Member Username: Omar_nab Post Number: 23 Registered: Oct-07	Posted on Wednesday, December 05, 2007 - 03:58 GMT i know that it works very good for DN but for BEV it is down...what can i do? i should wait for the new bin???
Nalin Nyda Gold Member Username: Nydas Post Number: 5701 Registered: Jun-06	Posted on Wednesday, December 05, 2007 - 04:04 GMT There is NO other realistic option for you.
omar nabil Bronze Member Username: Omar_nab Post Number: 25 Registered: Oct-07	Posted on Wednesday, December 05, 2007 - 04:15 GMT thank you veru mach nalin i apreciate your help

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us