I kinda have the same problem some of 110 I get and some that I know I should have like even the free channels like channel 5oo or the Science channel come on to say scrambled ive rescanned but still the same problem downloaded bin 225T any sollutions? Thanks
find out which tp the missing channels are on, do u have signal on that sat and tp? is it the same tp that all channels are missing? rescan the tp. i am sure u have power cycled it? (turn off and on from the back of the reciever.)
Dantent, To answer your question, I did use bin#225
Everthing Steve stated applies to me! In addition,I normally scan Echo7/ku to get PPV! now when I do so, it doesn't even get me the Freq I need in order to get the 500 channels!
I don't know what happened but got them to come in,I have dishpro 500 with one coax coming out of each lnb I went and hooked the receiver up to the opposite one and that didn't help went and swithed it back and scanned and all was fine,any suggestions on what happened for the future. Thanks to all for all the help and sorry to bother.
Do you have both ports from out of the LNB going to a switch then to your receiver....if so that is wrong and why you was having trouble. It will forever have trouble working that way. That LNB is designed for 2 receivers to connect to it. Its not one port for 110 and one for 119. It has a switch built in.
c/p DishPro Quads already have a built-in diseqc switch. Make sure your LNB settings are showing "OCS-DP" and set the diseqc commands for port 1 on 119 and port 2 for 110. You don't need any other switches inline with just these two sats, and you only need to run one cable from the DP Quad to the receiver. It dosen't matter which of the 4 outputs from the LNB you use, they all do the same thing. This will allow you to add 3 more receivers later.