Do you mean not on your channel list? Seams to be a small bug in the new bin that made your receiver lose some channels. Just simply rescan the sat's and you will get the channels back..
Channel master is hard to use with viewsat their is one called ODSedit you can get from viewsat's website.
BUT, IF you did not get those channels from a scan then did you check and be sure you still have all the DN transponders? I suspect you lost some of those as well....
I installed the new bin in my ultra and almost all channels are working. But in Nimiq 2 CBN (730), NDTV (Channel 727) are not working. They worked ok yesterday but today the signal strength shows as zero for these channels.
i found the source of my problem!! ME!! LOL i updated my ultra and my bud's extreme...when i tested the extreme...i did not screw in the coax correctly...i thought i did but i didn't....ha! that's so funny!!! i realized it when i went to verify my cnx in the basement...that one was working fine....so i knew i didn't have a bad lnb...when i got back upstairs to the ultra...my signal was blinking so i reached in back to remove the loop that i have going to the legit bev receiver and noticed that the dish was not screwed in....thanks for your help...ha! what a dum AZZ i am......
Mississauga User : 1. Do a TP scan. 2. Rearrange th ename in alpha order, go to TV nnn, and see through there if TV 730 and/or TV727 are there. If there, rename and you are watching New Delhi TV, etc.
after you read the numeris threads covering this topic please make a new thread including all your set up from receiver to antenna including but not limited to all switches, model #'s and brand names of all LNB's, receiver's, satellite's you can see or anything else pertaining to your system.
