Bronze Member Username: Chip_laPost Number: 24 Registered: Oct-07 | I have a koolsat 4000 using a r232cable norwood155bin and a2.4loader but keep getting connect cable and turn on unit.Any ideas? Thanks Chip |
Gold Member Username: NydasPost Number: 5315 Registered: Jun-06 | New ECM is progress. Wait for a day or two. |
New member Username: Me_mePost Number: 3 Registered: Nov-07 | Loading your koolsat.... -------------------------------------------------------------------------------- Downloading Firmware Make sure STB is connected to the computer using Null cable RS 232. 1. Turn STB power ON 2. Open STBTOOL.exe application icon 3. STBTOOL v1.5 screen appear. Firmware page and Download buttom will be selected which is preset 4. Browse and locate COOLSAT4000_100_20041208.stb and Open it 5. Click Auto Detect buttom to verify your computer COM port then click Exit 6. Click Connect then Start. It will take about 1 minute DO not interupt until download is completed 7. Once you see Vision 1.00 detected click X on the top right Downing Key Make sure STB is connected to the computer using Null cable RS 232. 1. Turn STB power ON 2. Open STBTOOL.exe application icon 3. STBTOOL v1.5 screen appear. Firmware page and Download buttom will be selected which is preset 4. Select Keys page and select Download buttom 5. Browse and locate SoftCamAmerica.Key and Open it 5. Click Auto Detect buttom to verify your computer COM port then click Exit 7. Click Connect then Start. It will take about 10 seconds DO not interupt until download is completed 8. Once you see Vision 1.00 detected click X on the top right Downing Channels Make sure STB is connected to the computer using Null cable RS 232. 1. Turn STB power ON 2. Open STBTOOL.exe application icon 3. STBTOOL v1.5 screen appear. Firmware page and Download buttom will be selected which is preset 4. Select Channels page and select Download buttom 5. Browse and locate ADD@82,97_11022004.NDF and Open it 5. Click Auto Detect buttom to verify your computer COM port then click Exit 7. Click Connect then Start. It will take about 20 seconds DO not interupt until download is completed 8. Once you see Vision 1.00 detected click X on the top right Hook up STB to TV and wait for 2 minutes channels will show up. Make sure you have the right Diseqc Setting ( Hardware and Software match ) STB are preset to 0000 password |