I tried converting my FLU to a 2700 via CS 224T full jtag binfile and BL updater. It went to 100%, then gave me our friend the knight rider lights. Did I do something wrong?
Did I need to use the jvvh files first, the way I understood it the 224T full jtag should have worked on my FLU (unconverted) directly no?
Anyhow I restored the factory BIN, and it seems ot be alive again. So should I proceed with the jvvh method instead?
1. Open/Run the Blacklist updater included 2. Make sure BIN is Selected not BOOT you are writing a Bin 3. Click select BIN 4. Choose j27_205_1.bin 5. Reboot reciever, on first light/dash, Click write bin. let it write When it is done, Be PATIENT>>>BePATIENT>>>>>>>>>>>>BE PATIENT>>>!!!! let it reboot after 2 minutes you will see B-75 FlashING on display 6. NOW WRITE THE SECOND BIN....Click select BIN 7. Choose jvvh_208_1.bin 8. Reboot reciever on first light Click write bin. let it write. let it reboot after 1 minute you will see B-75 Flash on display of reciever. 9. now Rewrite your Channel list back, BUT, BIG BUT, you must now select the 2700 settings in Channel master. 10. reconnect to Tv, select default key from parental options(key menu) let it roll 11. wait for next round