Bronze Member Username: RealniceguyPost Number: 20 Registered: Nov-07 | what are the setting fo r sat 118 .. international channels ..... for example is it suppose to be univeral .... hel what are the dish setting |
Silver Member Username: Space_invaderAndromeda M31 Post Number: 222 Registered: Nov-07 | To get 118W you need a LNBF that runs at 10750 freq... Right = Vertical , Left = Horizontal... Here is a link to view the LNBF needed... http://cgi.ebay.com/DUAL-LNB-CB2008A-ANIK-F3-FTA-FIT-SUPER-DISH-118-8-118-7_W0QQ itemZ150186461405QQihZ005QQcategoryZ149971QQssPageNameZWDVWQQrdZ1QQcmdZViewItem This one is a little expensive... But is just to give an idea... |
Gold Member Username: Crazy_greekPost Number: 1340 Registered: Jul-06 | This is the LNB for the new 118°W (Anik F3 / 118.7° / 118.8°) satellite. With this special LNB, you can get BOTH 118 and 119 at the same time! Works with both Free-to-Air and Original DN Receivers! Requires: 30-inch or larger dish Compatible with DirecTV, Free-to-Air (DiSEqC, 22KHz), and legacy switches (SW21, SW44, etc) Not compatible with DishPro switches and/or DishPro (stacked) LNB's SPECS Polarization: Circular Input Frequency: 11.70 - 12.75 GHz LO Frequency: 10.750 GHz Noise: 0.5 dB Dual-output (ready for 1 or 2 receivers) SETUP INSTRUCTIONS Using a 30-inch or larger dish, aim with the following settings: Satellite Name: 118°W (Anik F3) or 119°W (Echo7) LNB Type: Standard (or Single) LO Frequency: 10750 or 10600 MHz Finally, do an AUTO SCAN or a BLIND SCAN For some the following settings may work better or give you more channels: LNB Type: Universal LO Frequency: 9750 MHz HI Frequency: 11750 MHz |