Deri A, can u tell me how to load the new bin to pansat 2700 A. I have the null modem...when i hit download it stays at 0...its says downloading but stays at o...please help
#1. Make sure your USB to Serial Cable is compatible with your operating system.
#2. Connect your cable, install your drivers FROM a provided CD or from the manufacturer website and then make sure you have your drivers properly installed by checking the device manager.
#3.
- Go to Start - Control Panel - System - Hardware
- Go to Device Manager and Ports and see what Com your USB cable is set to.
- The Advance button will allow you to change the port. Change it to 1, 2, 3 or 4.
- Also be sure to change the Baud (Bits per second) to 115200.
#4. When using a loader from your specific reciever, make sure the COM port selected on the loader corresponds to the com port you changed in the previous step.
sorry i dont understand what u mean?? there are four ports on my pc...1 and 3 work...i tried both but both stays at o..do i have to change port number on my pc system/hardware.
deri, i want to write the steps down for future use...can u please tell me what's the next step after right click and select properties...thanks again buddy
No problem...also remember the channels will have a tendency to scrammel or wait for picture.....just input 8282 then select set default...it'lll come on eventually. Just be patient.
just change to a port number that you want to use....preferrably 1-4, because most will say "in use". Then you change the Baud (Bits per second) to 115200 and click okay. from there you can just load your bin. Just make sure you click the back switch and write bin at the same time. Feels great doing things for yourself right? Well I know I do. No more satellite man.
Go to port setting and change the Baud (Bits per second) to 115200, then go to port settings and click advance...there you will go to comp port number and change to the appropriate one.