Post Number: 4939 Registered: Jun-06 Posted on Saturday, November 17, 2007 - 01:09 pm:
-------------------------------------------------------------------------------- Teh most important words are "and 2 boxes"
Difficult if not impossible to use two boxes simultaneously for different channels with one motor!!! ------------------------------------------------- Not true you just don't know how.
The Invacom QPH-031 has four outputs two Circular and two Linear.
One output Linear & one Circular will be connected to 2 in 1 DiSEqC Switch. From this 2 in 1 DiSEqC Switch run wire to the motor and from the motor down to your FTA receiver. This receiver will control the motor.
From the other two outputs on the Invacom QPH-031 Linear & Circular run two wires to a Multiswitch to connect you other receivers. It will work every time if you know what to do
Good evening folks, can someone please help me with my pansat 2700a , trying to load new bin file but loader does'nt recognize the bin file, tried 2 loaders and 2 different bin files the 221 and the 223 bin files. Thanks in advance
well in another thread Yukon "might" be PRFRMNJ Yukon Bronze Member Username: One_eye_jack
Post Number: 21 Registered: Nov-07 Posted on Monday, November 19, 2007 - 06:24 pm:
-------------------------------------------------------------------------------- Blonde no need for you to look for PRFRMNJ at FTA bins he is already here.
This has NOT been confermed yet ..... but if this is true Yukon is not a "Rookie" to FTA and if anyone remembers this... PRFRMNJ and Nalin Don't get along. So makes sence to me why Yukon wants to make a fool outta Nalin.
