How to get Moved channels on118.75W

 

Silver Member
Username: Dure

Mississauga, Ontario Canada

Post Number: 130
Registered: Jun-06
Many channels from 121 has been moved to 118.Some one pl help me to know:
Which satellite to hook to get 118.75, Dish to be used 18" or 33" and the type of LNB to be used -Circular, Linear and the frequencies and all other necessary details. Any Special LNB to be used?
 

Platinum Member
Username: Lklives

Post Number: 13613
Registered: Jan-06
The LNB needed is here ...

http://transatelectronics.com/store/118°-circular-10750-dual-lnb_P272

118° (Circular 10750) dual LNB
$24.95

This is the LNB for the new 118°W (Anik F3 / 118.7° / 118.8°) satellite. With this special LNB, you can get BOTH 118 and 119 at the same time!

Works with both Free-to-Air and Original DN Receivers!

Requires: 30-inch or larger dish
Compatible with DirecTV, Free-to-Air (DiSEqC, 22KHz), and legacy switches (SW21, SW44, etc)
Not compatible with DishPro switches and/or DishPro (stacked) LNB's

SPECS
Polarization: Circular
Input Frequency: 11.70 - 12.75 GHz
LO Frequency: 10.750 GHz
Noise: 0.5 dB

Dual-output (ready for 1 or 2 receivers)


SETUP INSTRUCTIONS
Using a 30-inch or larger dish, aim with the following settings:

Satellite Name: 118°W (Anik F3) or 119°W (Echo7)
LNB Type: Standard (or Single)
LO Frequency: 10750 or 10600 MHz
Finally, do an AUTO SCAN or a BLIND SCAN

For some the following settings may work better or give you more channels:

LNB Type: Universal
LO Frequency: 9750 MHz
HI Frequency: 11750 MHz


ALTERNATIVE SETUP
If there are any missing channels, MANUALLY scan them in. You can refer to the channel list at Lyngsat.c*om

You may also load this satellite using SharpC's Channel Master program.
 

Silver Member
Username: Dure

Mississauga, Ontario Canada

Post Number: 131
Registered: Jun-06
Thanks LK. You have responded very quickly. Thank u again.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us