|
New member Username: VittuPost Number: 10 Registered: Oct-07 | I have a Fortec Ultra already converted to 2700 and a Pansat 2500a. Do I need to convert my 2500a to 2700? Are the files same for both? 221Tv2?? |
|
Platinum Member Username: LklivesPost Number: 13566 Registered: Jan-06 | U said its already CONVERTED to a 2700...and if U mean U have a 2nd receiver (2500) then yes convert that too...and that 221Tv2 bin is good for both receivers , AFTER conversion.. |
|
Gold Member Username: NydasPost Number: 4841 Registered: Jun-06 | According to LK, he recommends reading at the following sites and gathering information. I think this is too much for a newbie, but I am posting here anyway. Data Viewing Sequences [link removed] (Conaxsat and All receivers) Future FTA - Blacklist's Site: [link removed] (C00LSAT and All receivers) DSS Newbies: [link removed] (Pantecs,all clones and all receivers) File Share Site - No Registration Required: -------------------------------------------------- Good for gettting Original factory firmware: [link removed] Best site for DISHNET info, channels, transponders and changes etc.. [link removed] [link removed] [link removed] or get Keymaster 4.0 here free and NO registration is required... [link removed] |
|
Gold Member Username: NydasPost Number: 4842 Registered: Jun-06 | However my suggestions is as follows:- https://www.ecoustics.com/electronics/forum/home-video/402679.html My post dated 11th November, 2007 (first post) No. 4756 My post dated 13th November, 2007 No. 4834 |
|
New member Username: Alicic01Detroit, Mi Usa Post Number: 1 Registered: Nov-07 | hey guys i have a problem with new bin 221 for pansat 2700 its rebot it self every 30 min (shut off and on) is any fix for this Thank You Alex |
|
Gold Member Username: NydasPost Number: 4847 Registered: Jun-06 | alex: Shut off autoroll on DN, BEV, and GC. |
|
New member Username: Alicic01Detroit, Mi Usa Post Number: 2 Registered: Nov-07 | Thank You for your help, Nalin |
|
Bronze Member Username: VittuPost Number: 12 Registered: Oct-07 | Thank you guys. Much appreciated. Everything is working just fine. Loaded the same file to both receivers with no problem. |
|
New member Username: Rockman169Canada Post Number: 5 Registered: Nov-06 | DOES ANY KNOW IF THERE ANY NEW FILES FOR A MAGASAT YT6688 AND WHERE TO GO TO READ UP ON HOW TO PUT THEM ON MY RECIEVER |
|
Gold Member Username: NydasPost Number: 4875 Registered: Jun-06 | Rockman169: No new files till you convert. https://www.ecoustics.com/electronics/forum/home-video/402679.html First read the first post in the thread - My Post Number: 4756 dated 11th November Next read My Post Number : 4834 dated 13th November. |