HELP!!
|
Silver Member Username: ZunnaPost Number: 165 Registered: Jun-06 | can u plz giv me instructions on how to upload it to the box i also had 3000 pansat which is now converted to 2700 pansat?? plz let me knw how do i put the bin in it? i have download the 2700 pansat conversion kit nd it has files like j27_205 jwh_208 wat do i do nd where do i go??plz anyone |
|
Gold Member Username: Dude123Post Number: 1324 Registered: Jul-06 | https://www.ecoustics.com/electronics/forum/home-video/402679.html |
|
Silver Member Username: ZunnaPost Number: 166 Registered: Jun-06 | is this the right one??? is this the bin im suppose to upload like it says is it right?? How to load bins to your converted Pansat 2500 (which is now a Pansat 2700) - Please turn OFF your receiver - Connect your receiver to your computer using RS 232 female-female Straight Cable - Now open the Blacklist STB Updater 1.4.0.0 - Now, please select the "BIN" option on the Blacklist STB Updater 1.4.0.0 - Now please select the correct "COM" port on the Blacklist STB Updater 1.4.0. - Now, please click the "Select Bin" button on the Blacklist STB Updater 1.4.0.0 - Now, please look for the latest bin and click on it - Now, please turn ON your receiver and as soon as you see the first "dash light" on your receiver's front panel, click the "Write Bin" button on the Blacklist STB Updater 1.4.0.0 - Now, please wait and let the bin download process complete - When it's done, your receiver will REBOOT automatically and soon you'll see B 7 5 flashes back and forth on your receiver's front panel - That flashing B 7 5 will stop and freeze on number 5 for 30 seconds - After 30 seconds or so, your receiver will automatically boot (It'll turn ON automatically, after 30 seconds) - Now, please turn your receiver OFF and disconnect it from your computer Note: After you finish with the above steps, you have to re-scan your satellite(s). After you're done with that, you have to enter the latest keys (Dishnetwork or BellExpressVu). Here's what you need to do after you re-scan your satellite(s): - Go to MENU - Then, go to Parental Control / CAS Control Menu - Then, go to Second Pin and enter 0000 - Then, go to Set Default Key - Then, go to Nagravision 2 to enter the latest Dishnetwork or BellExpressVu keys |
|
Silver Member Username: ZunnaPost Number: 167 Registered: Jun-06 | rs232 cable where does this cable go i dun have nothin behind my pc ..can someone help plz?? |
|
Gold Member Username: Donnie1973Post Number: 1776 Registered: May-06 | if u have a laptop, u may not have this connection on it, on a desktop, it is there. On the back |
|
Gold Member Username: Dude123Post Number: 1325 Registered: Jul-06 | even some desktop computers don't have this connection, I have a compaq desktop and sony desktop computers. compaq has it and sony doesn't so it depends what kind and how old the computer is......well if you don't see that port in the back of your computer then you need to get a usb to serial adapter, but before you buy that adapter make sure the adapter is compatible with windows vista (if you have vista) most adapter are not compatible with vista. |
|
Gold Member Username: Dude123Post Number: 1326 Registered: Jul-06 | and if you have a laptop then you will have to get the adapter because 95% of the laptops don't have that port in them...same rules apply that if you are using windows vista make sure the adapter you buy is compatible with windows vista. |
|
Silver Member Username: ZunnaPost Number: 179 Registered: Jun-06 | thx a lot everyone  |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics