Converting Pansat 2500a & FLU

 

New member
Username: Master_lee

Post Number: 5
Registered: Oct-07
First I would like to say that NO one here
knows how to make a converting Bin File for a receiver.Few here only tell you what they C/P from other sites.
First they tell you this Bin is safe then NO it's not safe.So far if I counted right there has been three or four decoders six Bins & two C/Ps.

I will keep my Pansat 2500a as it is.I am still using Bin 289T keep Autoupdate and Autoroll OFF.
Missing only few channels like some PPV & P orn.
Your choice stay with this up & down convertion
or go out and buy a new receiver the cost of
$ 100-150 dollars. As of now the signal is still FREE.
 

Gold Member
Username: Nydas

Post Number: 4791
Registered: Jun-06
JOHNNY BOY :
you said "one here knows how to make a converting Bin File for a receiver"
For a newbie that is tall statement. One member has made three versions of jvvh conversion bins and has posted that information.
Also know that jvvh conversion has been around for over 6 months and that is a long time in the FTA world.

You said " Few here only tell you what they C/P from other sites. "
I suggest you look my instructions in the first post at
https://www.ecoustics.com/electronics/forum/home-video/402679.html
It is ALL from personal experience, and if you do it, you WILL get good TV.

You do not have the ability to do a serial load and you have come to preach here.
First learn before you preach to others.
 

Bronze Member
Username: Kacha

Post Number: 15
Registered: Jan-07
Hi Nalin...is ukr bin better or chancy 221 for a converted (2500 to 2700) pansat???
 

Gold Member
Username: Nydas

Post Number: 4801
Registered: Jun-06
The ukr_221 bin was better, but did produce alteration in the remote and the occasional reboot. The Chancy version 221Tv2 lightning 100 might have overcome the vertical scan problem, in which case it might be better.
 

Bronze Member
Username: Kacha

Post Number: 16
Registered: Jan-07
thank u..
 

Bronze Member
Username: Master_lee

Post Number: 13
Registered: Oct-07
Mr. Nalin only the nick is a newbie.
OK show me where this conversion was posted 6 months ago and the person here that has made three conversions. And like I have said I do have good TV because I am not a newbie to buy all this BULLSHIT. Iam only speaking the truth
are you? well time will tell.meantime answer my questions.
 

Gold Member
Username: Nydas

Post Number: 4802
Registered: Jun-06
The CCC referred to below is the highly technical Computer Contraptions site which has since closed. Note the date of posts

https://www.ecoustics.com/electronics/forum/home-video/325879.html
Posted by t_freenet
Posted on Thursday, February 15, 2007 - 07:01 am:

one of the better freeware testers has coded your boxes to a 2700 pansat...many are testing this file
now. no memory my mommas but
real testers owe jvvh a big thank you on this one.
reports look good ,fast changes ,4 day epg .etc..
jtag file only. thanks jvvh ,chancy, all the others at the CCc.

Posted by Nalin Nyda
Post Number: 1872
Posted on Thursday, February 15, 2007 - 01:29 pm:

This is a very significant break through. The 2500 and the clones (including FLU) are upgraded to 2700 through software and hardware. The hardware part is not needed if you do not need the vertical scan, but it might be worth it to get the memory upgraded to 2M.
It is in development stage. There is still some work needed. The recommended version if the h version, although some people trying it have reverted to f version.
IT IS NOT for the general body of users. You must be an experienced tester and must know Jtag technique.
Once the bugs are ironed out, it will mean a new life to the 2500 and clones.
**-- **-- **-- **-- **-- **-- **-- **-- **-- **-- **--

Black Tyger Bins 01, 02 and 03 are made by member AV with help from jvvh.
 

New member
Username: Sydfahim

Post Number: 10
Registered: Jun-06
Hi, Nalin, Av
I used the bin file ukr_221_pwD_GC but it gives me the free chanels only on dishnetwork the rest are scrambled? would you help me
 

Gold Member
Username: Cartier1

Post Number: 1363
Registered: Feb-07
JOHNNY BOY
Bronze Member
Username: Master_lee

you have pansat2500 that you could not convert to 2700 and u still use old bin that is outdated with no ppv. a kid in 1 st grade can do the conversion. and all this make u not newbie .
?????

the coder or decoder are poeple who right programs
it's not 1.2.3 it's very difficult to do . we are just testers that enjoy what other creat . so go get some deep sleep and dont try to challenge poeple here who just try to help other in this field . so if u pay someone here and not happy with his service then stop doing it .

go learn little before u start crying foul.
 

Gold Member
Username: Cartier1

Post Number: 1364
Registered: Feb-07
syd dont expect to inject a bin and watch . try to do some steps before you get the channels /

1st always try to check your set up after puting a new bin always.

check ur autoroll if off turn it on .
anthena set up if nothing changes.

then set defautl key and then wait for picture to download and then enjoy your tv .
 

Bronze Member
Username: Sydfahim

Post Number: 11
Registered: Jun-06
Thanks cartier
I did as u told me but nothing change BEV work well but dishN does not only free chanels and the rest scrambled do u have other suggestion
 

Bronze Member
Username: Master_lee

Post Number: 18
Registered: Oct-07
cartier read my post again and tell me where
does it says that I want to convert my receiver?
.................................................


JOHNNY BOY
New member
Username: Master_lee

Post Number: 5
Registered: Oct-07
Posted on Monday, November 12, 2007 - 10:28 am:

--------------------------------------------------------------------------------
First I would like to say that NO one here
knows how to make a converting Bin File for a receiver.Few here only tell you what they C/P from other sites.
First they tell you this Bin is safe then NO it's not safe.So far if I counted right there has been three or four decoders six Bins & two C/Ps.

I will keep my Pansat 2500a as it is.I am still
------------------------------------
using Bin 289T keep Autoupdate and Autoroll OFF.
Missing only few channels like some PPV & P orn.
Your choice stay with this up & down convertion
or go out and buy a new receiver the cost of
$ 100-150 dollars. As of now the signal is still FREE
...........................................
cartier1
Gold Member
Username: Cartier1

Post Number: 1363
Registered: Feb-07
Posted on Wednesday, November 14, 2007 - 12:40 am:

--------------------------------------------------------------------------------
JOHNNY BOY
Bronze Member
Username: Master_lee

you have pansat2500 that you could not convert
------------------------------------------------- to 2700 and u still use old bin that is outdated with no ppv. a kid in 1 st grade can do the conversion. and all this make u not newbie .
?????

the coder or decoder are poeple who right programs
it's not 1.2.3 it's very difficult to do . we are just testers that enjoy what other creat . so go get some deep sleep and dont try to challenge poeple here who just try to help other in this field . so if u pay someone here and not happy with his service then stop doing it .

go learn little before u start crying foul.
---------------------------------------------

cartier
How long have you been in this country?
You should understand what you are reading
before you answer. Ask an American to explain to you before you post.

BTW I have almost forgot, you say that you are a tester, but you didn't say what kind of tester
you are.Could that be a tester in your family's
restaurant?
 

Gold Member
Username: Nydas

Post Number: 4853
Registered: Jun-06
syd: You are in the wrong thread. go to

https://www.ecoustics.com/electronics/forum/home-video/402679.html

First read the first post in the thread -
My Post Number: 4756 dated 11th November
Next read My Post Number : 4834 dated 13th November.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us