I am new for this please help me any one I have dish network dish and pansat 2700A I want to see Indian Channel I have problame. I can not set my dish on 61.5E so I can set my dish on 148. I can get good signal for 110 and 119. so, I can watch Indian on 148 or not and also I need to know I need to change LNB for 148 or not. Please HELPPPPPPP me.
Please help me how to set dish I am trying but I am can not get signal. I am getting good signal for 110 & 119. How to set for 148 please write for me Dr. Tooter.
I got Address: groton,CT Latitude: 41.344A° Longitude: -72.069A° Satellite: 148.0W Echostar 1, 2 Elevation: 1.8A° Azimuth (true): 260.6A° Azimuth (magn.): 275.0A° LNB skew: 47.8A° how to setup please show me. When I am set my disk on 260.6 or 275.0 I am not getting signal but when I am little gomove my disk down around 35-40 so I am getting signal for 110or 119 but my echostar receiver say that and I select dish 148 thay says this is wrong disk so please help me for step by step please
not sure if someone on the east coast can pick up 148.
set up the pansat for the satellite you want to receive ,menu,installtion, antenna settings , select the sat you want and assign lnb type(diseqc switch port if needed) and connect to sat dish. use dishpoiter.com set the x at your dish location and aim as shown on the site and adjust the elavation till you find signal