i have an original pansat 2700a and it has been awhile to reflash it ,almost a year.i know the last file been released by chancy 220.which loader i have to use: 1.4.0.0 or something else thnkx a lot guys
Boot upgrade instruction for 2700A model from old ver. b62 to new b75.
1. b75 boot upgrade needed to accept new version software version Pansat_2700A_070313_B75_121.api_1 2. Connect RS232 null modem cable between PC and the receiver. 3. Open new GTRom Loader v27.02(Pansat2700A B75). Old version v27.01 does not work. 4. Click BIN File and open "Boot_2700A(b75)_(07)0310" new boot file. 5. Turn the receiver power "ON" and click download and wait until "Download Completed OK" appears. Front LED will display moving b-7-5 left to right if upgrade succeeded. If night rider dot moves constantly which means the receiver became defective , but old v62 boot file still alive condition. This situation can be happened when you downloaded new bin file without b-75 boot file upgrade first. The unit have to be fixed by downloading old api file dated on or before Dec 17, 2006 ( should use old v27.01 Loader). Then repeat above steps. 6. Open new bin file matching with b75 boot version (Any api version dated on or after Mar 13, 2007) and click download. Wait until "Download Completed OK" appears. Front LED will display "ON" or any channel number after b-7-5 shows shortly if download succeeded. 7. 2700A, 2700A(IR), 2700E all 3 models can be applied.
Gastrognome My Pansat 2700 Clone display night rider dots moving across after loading Chancysands new 220T bin. I am unable to fix it Could you please help. Same prcedure for genuine as shown above is ok or have I got to use different files for my clone. If so what are the files to be used and the websites if possible. Thanks