Manually Setting up a Dish?

 

Bronze Member
Username: Afaizi

Post Number: 18
Registered: Sep-06
I have a question on installing a dish. I am trying to set up a dish facing 119, but my question is how will I know that the orientation is correct. Is there somewhere I can go on the receiver that will tell me that the signal is locked at 119?
 

Silver Member
Username: Runnerguy

Pluto

Post Number: 756
Registered: Sep-06
http://www.dishpointer.com/
 

Bronze Member
Username: Afaizi

Post Number: 19
Registered: Sep-06
How will I know when my signal is locked?
 

Bronze Member
Username: Afaizi

Post Number: 20
Registered: Sep-06
I am currently using a switch with 4 ports, with 148 in port 1, 110 in port 2, and i plugged in 119 in port 3 but don't know how to go on from here with adjusting the dish outside.
 

Silver Member
Username: Dimwitt

Post Number: 176
Registered: Aug-06
installation / antenna set up , select echo 7 119, select lnb type , diseqc port 3, the quality meter will increase as you get a proper signal.

using www.dishpointer.com place the x at your dish location, select 119 , aim the dish at a landmark and adjust elavation till you get good quality
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us