This is how to load your 2500,FLU or clone to a 2700 clone via the SERIAL PORT
NO Need to Jtag!!!!...Just follow these instructions...Pay attention to these steps and specifically the Timing of Bin uploads..
You will Need a Pansat remote, but others have been sucessful with their receiver remotes.
READ your Channel list with Channel MAster and leave open in background.
Read and write down your antenna receiver settings, some place.VERY IMPORTANT
1. Open/Run the Blacklist updater V 1.4.. 2. Make sure BIN is Selected not BOOT you are writing a Bin 3. Click select BIN 4. Choose j27_205_1.bin 5. Reboot reciever, on first light/dash, Click write bin. let it write. Timing is Important here!...be persistent! When it is done, Be PATIENT!!!! Let it reboot, after 2-3 minutes you will see B-75 Flash on display of reciever. Be patient while this occurs. Do NOT interrupt this.. 6. Click select BIN 7. Choose jvvh_208_1.bin 8. Reboot reciever on first light Click write bin. let it write. Again , Timing is Important here, be persistent. Let it reboot after 1 minute you will see B-75 Flash on display of reciever. 9. Now Rewrite your Channel list back, BUT, you must now select the 2700 settings in Channel master. If U prefer, U can do sat scans instead of using channel lists and channel master. 10. Reconnect to Tv, select default key from parental options (key menu)..let it autoroll 11. Now U have ONLY just done the conversion and must now upload latest Jvvh BIN..
OK...now U have done the conversion but now U need the and upload latest and most current jvvh bin, and do new channel scan or upload your channel list, and set default key, be patient when keys roll...U can use the same remote and loader that U have used during the conversion..
Hi please help my buzz S2010f regular jump. Someone told me i have to download factory bin nov,15,2005 and after that rest factory, and download bin oct,26, 2007. but i have same problem when i download factory bin. please help help me thank you very much
marc rayan: Buzz was the original receiver from which came the Sonicview models. I think, therefore, that the http://www.totalfta.com site is reliable.
Since you are having problems, you could read in their forums at http://www.totalfta.com/forums/forumdisplay.php?f=134
Also you could try uploading an older buzz file such as s2010f_11sep2007.zip (1,007.3 KB) and then the latest.
Hi everyone I have a viewsat extreme 2000 I can get reg channels and japenese channels but cannot get any of the arabic,turkish and hindi channels what do I need to do? Thanks
Converting 2500 to 2700. Latest instructions from jvvh are to ignore his previous suggestion to start with jvvh BIN 205 and instead to start the conversion with jvvh 208.
everything is working fine now, my question is i only enter my keys manually and a couple of things has changed. parental is gone, it say cas control menu now.
another thing is when i go to nagravision 2 i don't see the 0106, i only have 0101 and 0901 in provider id. IS THERE SOMETHING WRONG? DO I SET MY AUTOROLL OFF? that's what i did last time.
btw i own a pansat 3000, i guess they've converted it already. paid 20 for it.
Ali3: You should get Hindi channels on 148. Do a Blind scan or Advanced scan. If no success, load and older BIN, then load the latest, and do rescanning.
can u giv me the latest JWH bin file that i have to upload onto my pansat 2700 after converting it from a 2500 to 2700 (my pansat was a clone) plzzz and thank you!
Sonny Jaworski : Set autoroll on. It seems that the BIN writer has got the 0106 ID programmed in, but is not showing it. If you try to enter keys manually, it may not work. Till you scan one sat, you will not be able to use cas control. You also have to do all user settings and antenna settings before you start scanning.
HELP ME PLEASE ON THIS ONE. I have converted my Fortec life time ultra to Pansat 2700, everything was fine while i was using last eve, when i see this moring no power on my receiver. Your help is greatly appricated
scan? sorry i'm confused. i've scanned it and everything is working fine. i got ppv now. what i'm worried about is when i have to change keys next time. i've read that 0106 now. do i still use the 0101 keys?
can u plzz giv me the latest JWH bin file that i have to upload onto my pansat 2700 after converting it from a 2500 to 2700 (my pansat was a clone) plzzz and thank you!
Nalin I apoligize but I am not very good at this where do I go to get the Bin and after that how do I download the bin onto the reciever? Sorry but much thanks for your time your wonderfull.
Hussam Arif : Look for the files and instructions at
[link removed] [link removed]
The conversion is first using jvvh 205 or jvvh 208. Latest file to load is jvvh 218. There is also a thread here with a lot of instructions and discussions. Follow the insturctions carefully, except that you should use BL updater 1.4 for loading files into your receiver.
Ali3 : To download files, to unzip them and to read instructions, etc., is computing knowledge. To become a member at a site is also computing knowledge, and the fact that you are posting here means that you know how to. The knowledge you do not have is contained in the instructions in those files that you download. It also is there with a lot of people who are helping in that particular type of expertise.
I've been out of town and returned to no FTA! I'm running a FLU. I've been reading about a new provider. Please point me in the right direction to get back on-line. - KmW
At my pansat 2700 (clone) after upload jvvh_218_pt.bin Im not getting any Indian or pakistani channels.Only some unknow english channels.. And also let me know about AUTO ROLL ON/OFF..Should I ON/OFF auto roll..
Nalin I still have same problem. i download sep,11 file bin and the new one doesn't work. and i did download sonyview sv1000. my receiver got freezing. I got letter 'E' in the clock screen.
Please help. Just tried to convert 2500a to 2700a. Ran loader 1.4 and j27 bin. All was going great, but never rebooted. Now when I power it up, I get nothing.
Guys plzz help, I downloaded the new bin successfully but when I go to smart search my reciever freez's on 0%? what should I do? plzzz I need your advice!!!!
I have successfully converted my FLU. I am now watching both echo 3,61.5 and echo 7,119. But I am not getting any channels when I scan the FTA channels of G25-Ku at 97. These free channels were working before the conversion. Is there anyone who is getting the free Middle eastern channels after the conversion ? Please share the experience. Thanks.
can someone guide me what is COM on coversion steps.... on my downalod it shows COM1, COM2, COM 3 COM 4... NOT SURE WHICH ONE TO SELECT N HOW TO FIGURE OUT THE RIGHT ONE???????
Dish-it: You should pay a little more attention to what is happening around you. At any site you visited to get the files or instructions, you would notice that the latest BIN is jvvh 218. If you care to read a few of the threads of forums you would notice that things started going bad about 4days ago and new files came out with a date of last 4 days. YOU DO NOT ENTER KEYS MANUALLY. They will automatically roll in with autoroll on. You will however need to restore all user settings and antenna settings.
jjar jjari , The same thing happened to me. I think the name has changed to G25/ku. It is at the same angle of 97. I am not having sucess but give it a try. Try to scan it.
hey AV i wanaan to upgrade my 2500 to 2700 plz help me i saw ur message on befoer that post how to do it but my com port is not working so wat i do? plz help i wanna watch cricket tonight plz help me thanx
please help my buzz S2010f regular got freez. Someone told me i have to download factory bin nov,15,2005 and after that rest factory, and download bin oct,26, 2007. but i have same problem when i download factory bin. please help help me thank you very much and now,I still have same problem. i download sep,11 file bin and the new one doesn't work. and i did download sonyview sv1000. my receiver got freezing. I got letter 'E' in the clock screen. PLEASE HELP THANKS
Does n e 1 know y i cant watch some of my channels.. Im missing a couple movie channels and all my xxx channels. Does n e 1 else have this problem? Doe n e 1 know how to fix it...? Please help.... My codes r up 2 date... I own a kool sat. dis is my first time seeing this type of problem. Thanx in advance...
ANYONE PLEASE; I AM CONVERTING MY PANSAT 2500A TO 2700 USING THE CONVERTING KIT I AM USING RS232 STRAIGHT CABLE(I HAVE USED THE SAME CABLE BEFORE TO DOWNLOAD BINS)IT GIVES ME AN ERROR MESSAGE WHEN I CHOSE COM 1,2,3,4 (CANT OPEN SERIAL PORT)IS THERE A DIFFERENT LOADER I COULD USE? PLEASE HELP ME FOR THE SAKE OF SPONGEBOB
hello AV,Lk, Nalin i downloaded jvvh_218_pT_Gc_(NO_BG) is that the right bin file for my converted FLU to Pansat 2700 to see international on DN and BVu Thanks
please help my buzz S2010f regular got freez. i can't on and off power botton. Someone told me i have to download factory bin nov,15,2005 and after that rest factory, and download bin oct,26, 2007. but i have same problem when i download factory bin. please help help me thank you very much and now,I still have same problem. i download sep,11 file bin and the new one doesn't work. and i did download sonyview sv1000. my receiver got freezing. I got letter 'E' in the clock screen. PLEASE HELP THANKS
ANYONE PLEASE; I AM CONVERTING MY PANSAT 2500A TO 2700 USING THE CONVERTING KIT I AM USING RS232 STRAIGHT CABLE(I HAVE USED THE SAME CABLE BEFORE TO DOWNLOAD BINS)IT GIVES ME AN ERROR MESSAGE WHEN I CHOSE COM 1,2,3,4 (CANT OPEN SERIAL PORT)WHAT IM I DOING WRONG?
Can someone still running the 294T BIN still working for Pansat clone 2500 with Autoroll post your Keys. I am still running the 284T date: Nov 2006. The only thing I'm missing is PPV. thanx
ANYONE PLEASE; I AM CONVERTING MY PANSAT 2500A TO 2700 USING THE CONVERTING KIT I AM USING RS232 STRAIGHT CABLE(I HAVE USED THE SAME CABLE BEFORE TO DOWNLOAD BINS)IT GIVES ME AN ERROR MESSAGE WHEN I CHOSE COM 1,2,3,4 (CANT OPEN SERIAL PORT)WHAT IM I DOING WRONG?
help me please, I have a SonicView 4000 after I loaded the 167 bin, I lost eveything after channel 450, so no PPV's, I already loaded the 169 bin, and still the same problem, no PPV's and I don't know how to delete all channels and scan everything again,
Nalin, I am going to replace my ariza700 reciever, can you plz advise me which onr is the best to buy and will lost more than 12 mons ? I really appreciate your technical advise.
I have Pansat 2700A (original). BIN file "X-87BL_071023_B75_218_api_1" downloded successfully, but the box is not booting. What I see is just the "_" moving left to right. I did not rush to close the loader programe untill I saw "down load is completed" message. I connected the box with cable and TV but got blank screen. The led on Pansat box just show moving "_". What I have done wrong? Need help. Thank you.
ya i have a fortec lifetime ultra and i have absolutely no clue for which file i have to load. i understand wat i have to do. Would someone just please tell me the file i'm suppose to use?
It looks like you did something wrong and got knight rider lights. Please load the BOOT FILE for Pansat 2700 followed by the FACTORY BIN for Pansat 2700. Then, load the latest working bin for Pansat 2700.
any one can help converting 2500 to 2700 plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz