I have Pansat 3500. I accidentally loded wrong bin file (Pansat 2700 bin) into my Pansat 3500SD. Right noe my reciever doesn't want to power on. Any suggestions??
may not work on some computers.you may need an older version computer or laptop.
1-- i purchased my jtag cable thru ebay 2-- remove cover of sat box only 3 screws. 3-- make sure your sat box is off and your computer is not running any programs. 4-- connect your jtag cable to computer and to reciever. 5-- now turn on sat box on rear switch 6-- open skymax 2.2 can be dowloaded basically any site make sure its a recommended site. 7-- change setting under adr flash to setting 2mb (7FE00000) and make sure select LPT port 1. 8-- under connection click start and wait till complete then under flash operation select erase and wait till complete. 9-- now under flash operation you will select write a window will pop up at the bottom change from rom file to all files. then select the pansat 3500s-flash 1(29LV160CBTC-70)-full.once you selected this file skymax will automatically start the process of writing the file to your sat box.depeding on your computer it may take a while. 10-- once it says complete turn off sat box remove jtag cable. 11-- once jtag cable is removed turn on switch and the display screen should show b70,if so you have completed this procedure correctly. 12-- now you just have to load the boot file 80 and the current bin. 13-- enjoy.
