Bruce I . Do i need to reload the factory Bin Captive Works 600s

 

Bronze Member
Username: Book77

Post Number: 86
Registered: May-06
As I said in my last thread. I have CW 600S and since I loaded the last bin 1.39 it will not comunicate to my computer.

I am using loader 1.05

Do in need to load the factory bin and start over.

Where do i get the factory bin.

Help
www.www.ecoustics.com/electronics/forum/home-video/396602.html
 

Silver Member
Username: Brucester

Post Number: 574
Registered: Jul-06
CW-600S: Factory Bin (1.14) 02/20/07

--------------------------------------------------------------------------------

Factory bin.

Looker
Attached Files CW600SV1.14_Recorder_2_20_07.zip (791.
i got this from dssrookie*com chang the *to a dot. it is free to reg you will get your box going if you go to this site
 

Bronze Member
Username: Frobi

Guelph, Ontario Canada

Post Number: 66
Registered: Aug-06
Bruce, what is the latest file for CW 600s premium? I downloaded CW600PV1.53 yesterday (24/10/07) but most channels were scrambled. Echo 3 and PPV were not coming. Only some were working.
Thanks again.
 

Silver Member
Username: Brucester

Post Number: 576
Registered: Jul-06
im on bev all is good im using bin 152 but went on dssrookie and lots of others are having trouble you can try doing this factory reset then enable patch and when it rolls turn off auto roll this might help others are reporting that it started working after a couple of hours and others say it is working good if i were you i would go to dssrookie*com change*to a dot. and read what others are doing or wait till tommorow and there will be a nother bin to fix this one.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us