VIEWSAT EXTREME ISSUE HELP

 

New member
Username: Unluck

Windsor, Ontario Canada

Post Number: 8
Registered: Aug-06
I am having a problem with my viewsat. I was away all night and it was on. I just loaded the new program and all I have is 4 dotted lines in the front. No on or channels or anything. What happened to me?
 

Gold Member
Username: Donnie1973

Post Number: 1111
Registered: May-06
factory reset it and try again. make sure u are using the extream file.
 

Gold Member
Username: Donnie1973

Post Number: 1112
Registered: May-06
u may need to load it with a factory bin first.
 

New member
Username: Unluck

Windsor, Ontario Canada

Post Number: 9
Registered: Aug-06
I just did a factory reset and now it says FAIL
 

Gold Member
Username: Donnie1973

Post Number: 1119
Registered: May-06
out in a factory bin from totalfta or ftaprosupport. Then reload latest bin over that
 

New member
Username: Unluck

Windsor, Ontario Canada

Post Number: 10
Registered: Aug-06
I just loaded another program and it says " END " I powered off and turned on and I have my 4 dotted lines again.
 

Bronze Member
Username: Unluck

Windsor, Ontario Canada

Post Number: 11
Registered: Aug-06
I loaded the latest factory from ftasupport and then the latest bin and I get the same thing....
 

Gold Member
Username: Donnie1973

Post Number: 1120
Registered: May-06
what will it do if u just load the factory bin on it and try to watch tv?? I know u wont get everything but u can see if it works at all. Might be a bad bin file.
 

Bronze Member
Username: Unluck

Windsor, Ontario Canada

Post Number: 12
Registered: Aug-06
I have 2 identical receivers and my other one works great with that file. I am getting nothing at all. It's not even allowing me to get into the receiver to load channels.
 

Gold Member
Username: Donnie1973

Post Number: 1123
Registered: May-06
I would put the factory bin on it and see what u get.
 

Bronze Member
Username: Unluck

Windsor, Ontario Canada

Post Number: 13
Registered: Aug-06
I keep doing that and it keeps coming back "FAIL"
 

Gold Member
Username: Donnie1973

Post Number: 1124
Registered: May-06
thereis a post at total called "bring your reviever back from the dead" maybe read that.
At least u have lights and it is responsive somewhat.
 

Bronze Member
Username: Unluck

Windsor, Ontario Canada

Post Number: 14
Registered: Aug-06
I just tried it out and I get a black screen. Nothing has changed.
 

Gold Member
Username: Donnie1973

Post Number: 1125
Registered: May-06
same readout on the front??
 

Platinum Member
Username: Lklives

Post Number: 12774
Registered: Jan-06
If it says FAIL...then its NOT dead!...its a cable or comport issue...or bad timing in upload...be persistent and force upload the factory bin!
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us