Echo 8.10Ku and 7Ku help

 

New member
Username: Gonxggo

Post Number: 5
Registered: Mar-07
Friends,

I have Fortec star receiver. I am not getting american channels. I scanned Echo 8.10Ku and 7Ku on switch 1 and 2 respectively. I also tried blind scan but it is not showing these channels. I have no problem with 61.5. Can someone please help?

Regards
 

Bronze Member
Username: Reach_honey

Post Number: 54
Registered: Mar-05
I'm having American channels but not South Asian Channels.
 

Silver Member
Username: Rtap

FL

Post Number: 560
Registered: Jan-07
try a factory reset then load bin again and scan birds.good luck
 

Gold Member
Username: Donnie1973

Post Number: 1107
Registered: May-06
make sure u are pointing to the right sats.
 

Bronze Member
Username: Reach_honey

Post Number: 55
Registered: Mar-05
I did factory Reset then loaded bin which i was using earlier and selected angles which I was using it. Only thing I can get right now is 110 and 119 but I'm not getting anything from 148 or 61.5 which has South Indian Channels
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 1597
Registered: Oct-06
When yo point to 61.5
Yo need to change freq at LNB so yo can start see signal quality
If some transponders moved leaving TP level low
Yo won't see quality level

I'm not sure what freq but increase not decrease
Yo'll see level then yo can scan 61.5
May have to use Sat finder
 

Gold Member
Username: Crazy_greek

Post Number: 1233
Registered: Jul-06

reach
Are you using one Dish for 110 & 119
and another Dish for 61.5 or move to 148?
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us