Satellite Help
|
New member Username: PopemogothDallas, Tx US & A Post Number: 2 Registered: Jan-07 | I use to keep up with the FTA. I have a fortec star it's an older model. Does anyone know of any site you could refer me to so i can read about what's new and how to set up my dish(which way to point etc.... I'd like to know about what box I need now since mine is from 2005. Thanks |
|
Silver Member Username: RtapFL Post Number: 549 Registered: Jan-07 | check these sites out.good luck https://www.ecoustics.com/electronics/forum/home-video/393425.html |
|
Bronze Member Username: JoonkadanmonPhiladelphia, Pa Usa Post Number: 25 Registered: Sep-07 | help anyone? tried dpwnloading bin files, dont know whatr I did wrong. Box fails to rebooth or downlaod, itdisplays the the digit{5} ? help please, did I FRY RECEIVER?!!!!! |
|
Silver Member Username: RtapFL Post Number: 556 Registered: Jan-07 | more info.what box,setup,file |
|
Platinum Member Username: LklivesPost Number: 12759 Registered: Jan-06 | sounds like he's trying the 2500-2700 conversion...#5 stuck, and not waiting for 30 seconds.. Pansat 2500 - Pansat 2700 Converting Procedure First, here's a list of things that you need: - RS 232 female-female Straight Cable - A Pansat 2500 remote control Instructions/Procedure: - Please turn OFF your receiver and disconnect it from the satellite & the TV cable - Connect your receiver to your computer using RS 232 female-female Straight Cable - Now open the Blacklist STB Updater 1.4.0.0 - Now, please select the "BIN" option on the Blacklist STB Updater 1.4.0.0 - Now please select the correct "COM" port on the Blacklist STB Updater 1.4.0. - Now, please click the "Select Bin" button on the Blacklist STB Updater 1.4.0.0 - Now, please look for the "j27_205_1.bin" file and click on it - Now, please turn ON your receiver and as soon as you see the first "dash light" on your receiver's front panel, click the "Write Bin" button on the Blacklist STB Updater 1.4.0.0 - Now, please wait and let the bin download process complete - When it's done, your receiver will REBOOT automatically and soon you'll see B 7 5 flashes back and forth on your receiver's front panel - Now, please close the Blacklist STB Updater 1.4.0.0 window - Please turn OFF your receiver - Now re-open the Blacklist STB Updater 1.4.0.0 - Now, please select the "BIN" option on the Blacklist STB Updater 1.4.0.0 - Now please select the correct "COM" port on the Blacklist STB Updater 1.4.0. - Now, please click the "Select Bin" button on the Blacklist STB Updater 1.4.0.0 - Now, please look for the "jvvh_215 file and click on it - Now, please turn ON your receiver and as soon as you see the first "dash light" on your receiver's front panel, click the "Write Bin" button on the Blacklist STB Updater 1.4.0.0 - Now, please wait and let the bin download process complete - When it's done, your receiver will REBOOT automatically and soon you'll see B 7 5 flashes back and forth on your receiver's front panel - That flashing B 7 5 will stop and freeze on number 5 for 30 seconds - After 30 seconds or so, your receiver will automatically boot (It'll turn ON automatically, after 30 seconds) - Now, please turn your receiver OFF and disconnect it from your computer - Finally, please connect the satellite and the TV cable to your receiver - That's It, you're done! Now, you have a Pansat 2700 Clone - Finally, download the latest bin to your receiver (Read my Bin Loading Intructions file for help) Note: After you finish with the above steps, you have to re-scan your satellite(s). After you're done with that, you have to enter the latest keys (Dishnetwork or BellExpressVu). Here's what you need to do after you re-scan your satellite(s): - Go to MENU - Then, go to Parental Control - Then, go to Second Pin and enter 0000 - Then, go to Set Default Key - Then, go to Nagravision 2 to enter the latest Dishnetwork or BellExpressVu keys |
|
Silver Member Username: RtapFL Post Number: 558 Registered: Jan-07 | thanks lk. i have a clone 2500 which i will convert to 2700 this weekend.i will let you know how it turns out. |
|
Silver Member Username: AsharfiPost Number: 895 Registered: Aug-06 | Thanks LK for putting the instructions up! .... lol ... and RTAP .... good luck with ur conversion .... lol ....  |
|
Silver Member Username: RtapFL Post Number: 562 Registered: Jan-07 | i will be laughing out loud when this conversion kicks my asssssss this weekend.lmao |
|
New member Username: Tony2007Spring, TX US Post Number: 1 Registered: Oct-07 | I am new, I have a pansat 2700 receiver but I do not know how to make it work. Please can some one help me step by step how to do it. Thank very very much |
|
Bronze Member Username: JoonkadanmonPhiladelphia, Pa Usa Post Number: 26 Registered: Sep-07 | Folks, I need help badly, I have a pansat 2700a, the thing worked for a few months then stopped. I attempted to download new bin files for dish network. Then all of a sudden the receiver refuses to booth, when it powers up, it cycles 6/ 7 and stays on 5, it says(5) THATS IT!, it does nothing else. Did I fry the receiver? if not, what have I done wrong?, how can I fix the problem? and can some one please instruct me how to download the BIN all over again and keys etc I've been frustrated for a week now. Thanks very mucy in advance thanks again folks! |
|
Bronze Member Username: JoonkadanmonPhiladelphia, Pa Usa Post Number: 27 Registered: Sep-07 | one more thing, why am I having trouble seeing the responses to my post? lawd am having issues with even that, am sure my kind satellite buddies will educate me though, lord I have a great learning curve here lol! |
|
Bronze Member Username: JoonkadanmonPhiladelphia, Pa Usa Post Number: 28 Registered: Sep-07 | Tuan, seems we are in the same boat, hope LK is on, he has a handle and all this stuff. good dude |
|
Bronze Member Username: JoonkadanmonPhiladelphia, Pa Usa Post Number: 29 Registered: Sep-07 | tuan you there? |
|
Silver Member Username: RtapFL Post Number: 563 Registered: Jan-07 | joonka what file did you try to down load. |
|
Bronze Member Username: JoonkadanmonPhiladelphia, Pa Usa Post Number: 34 Registered: Sep-07 | RTAP I dont remember at it was a few weeks ago, it was one of the bin files using winzip |
|
Bronze Member Username: JoonkadanmonPhiladelphia, Pa Usa Post Number: 35 Registered: Sep-07 | RTAP, it seems I dont have a handle on how to properly download the bin file business am new at this, however the receiver refuses to reboot, when it is turned on it cylese through 6/7 then stays on displaying 5? |
|
Silver Member Username: RtapFL Post Number: 565 Registered: Jan-07 | try loading the factory bin then loading the current bin. these are the current files out 2500-revised JWH 215ptd-1.zip 2700-x87bl 071009 b75 217 api.zip 2800-x88bl 071009 427 eubx api.zip 3500-x05bl 071009 332 api.zip 5000-x95bl 071008 3128 api.zip 6000-x6095bl 071008 3158 api.zip 9000hd-hd9000bl 071009 9020 api.zip 9200hd-9200bl 071009 9207 api.zip all available at future-fat*info or at ftabins*net replace the * for . |
|
Bronze Member Username: JoonkadanmonPhiladelphia, Pa Usa Post Number: 36 Registered: Sep-07 | will try to locate file on pc, to tell you excatly what file?, why cant I see your responses instantaneously, think this posting business is giving me trouble too LORD.. TAHNK IN ADVANCE rtap |
|
Silver Member Username: RtapFL Post Number: 567 Registered: Jan-07 | joonka word the wise do not post the same question in different threads its not necessary.eventually some one will help. |
|
Bronze Member Username: JoonkadanmonPhiladelphia, Pa Usa Post Number: 37 Registered: Sep-07 | RTAP, here is what I believe the root of my problem is, I believe I lack the basic understanding of the bin loading process and this is where I screwed up. Please give me the basic on where and how to load bin properly receiver is currently attached to computer thanks |
|
Bronze Member Username: JoonkadanmonPhiladelphia, Pa Usa Post Number: 38 Registered: Sep-07 | thanks RTAP, will take advice on posting thank you and thanks again for your help to this point |
|
Silver Member Username: RtapFL Post Number: 568 Registered: Jan-07 | step 1 connect rs 232 null modem cable to pc and stb step 2 open loader v27.02 step 3 in the loader press bin and select x87bl 071009 b75 217 api.zip step 4 press download and wait till complete is displayed. remember you must unzip or extract all files from the zip folder. good luck |
|
Bronze Member Username: JoonkadanmonPhiladelphia, Pa Usa Post Number: 39 Registered: Sep-07 | thanks RTAP will try this out |
|
Silver Member Username: RtapFL Post Number: 575 Registered: Jan-07 | your welcome.keep me posted. |
|
Silver Member Username: AsharfiPost Number: 908 Registered: Aug-06 | RTAP ... lmao .... first load all the files that r in the conversion kit THEN load the latest bin. |
|
Bronze Member Username: RealtorkimINDIANA United States Post Number: 23 Registered: Oct-06 | Hi AV, You guys are definitly making me laugh today. Hi joonka, I was going through same thing about a year ago with a original FLU. (Thanks AV) Now pansat 2700 clone. I don't want to be rude in anyway, The best advise everyone will give you is Point, Click and Read. Visit other sites(Links posted previously) check out the info for your STB box. File section how to's are really good. LK instructions for bin are to a T. Please read LOL. Sorry, couldn't help it. Good Luck though, you will get there sooner than you think.  Respectfully, Kimberly |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics